Loading ...
Loading ...
Loading ...
Intelligent Driving Assistance Terminal • User Manual
13
The device supports ignition startup and the prerequisite is that the terminal power is connected to
the vehicle ignition starter.
Refer to Section 4.1 for interface description, find 1 (Power), 4 (ACC), 12(Ground) and connect them to
vehicle battery as shown in Figure 4-2.
Connect device power to the anode of vehicle constant power. Skip the main switch of vehicle
constant power.
Connect the ground interface of the device to the cathode of vehicle constant power.
Connect the AAC interface of the device to the vehicle ignition starter.
Power Wiring
The vehicle constant power refers to the master switch of vehicle power system. After flaming out, the
constant power can still supply direct current to devices in vehicle.
Power Up and Check Device
After completing the above installation steps, power the device up.
Observe the power status indicator: If the indicator is solid red, it means the device is powered up.
Loading ...
Loading ...
Loading ...