Loading ...
Loading ...
Loading ...
Intelligent Driving Assistance Terminal • User Manual
8
Chapter 3 Installation
Preparation
Disconnect the power when you assemble, disassemble, or wire the device. DO NOT operate when
the power is on to avoid safety hazards.
Before installation, take out the device from the package and check whether the device and
accessories are included and whether they are damaged. Refer to Section 2.1 Packing List for
accessories checking.
This manual takes one type of various devices as an example for installation illustration. Devices
may vary from each other in appearance and size. Please refer to the actual device.
Before installation, you need to select an appropriate installation location and arrange cable
routing to make sure the power and cables are safe and stable. Convenience and rationality should
also be considered.
Select the location where the vehicle vibration is relatively weak (such as the rear space of the
driver seat or front passenger seat) and is away from the vehicle engine.
Make sure the intelligent terminal is away from the heat source of the vehicle and is installed on
the location with good ventilation for heat dissipation.
Due to the special heat dissipation feature of the intelligent terminal, please reserve enough
installation space for the device. The recommended space is illustrated in Figure 3-1.
Recommended Installation Space
Unit: mm (inch)
Loading ...
Loading ...
Loading ...