Loading ...
Loading ...
Loading ...
Warning
Terminal PE should connect to a ground wire to avoid hazard when people touching the device.
Note
●
The cable bare part should be no more than 8 mm. If possible, wear an insulaon cap at the end
of the bare cable. Make sure there's no bare copper or cable aer the wiring.
●
The Terminal L and the Terminal N cannot be wired reversely. Do not wire the input and output
terminal reversely.
●
To avoid people injury and device damage, when tesng, the ground resistance of the
equipotenal points should not be larger than 2 Ω。
4.3 Terminal Descripon
4.3.1 Lane Control Board Terminal Descripon
The picture displayed below is the main control board diagram.
DS-K3G501LX Series Tripod Turnsle User Manual
11
Loading ...
Loading ...
Loading ...