Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/67177734-ds-k3g501lx/bg12.png)
Figure 3-2 Dimension
1.
Prepare for the installaon tools, check the components, and prepare for the installaon base.
2.
Drill holes on the ground according to the
installaon holes on the pedestals and insert the
expansion sleeves.
3.
According to the entrance and exit marks on the pedestals, move the pedestals to the
posion.
4.
Seal the boom of the turnsle to avoid water from entering.
Note
Make sure the installaon holes on the pedestals and the base are aligned with each other.
5.
Secure the pedestals with expansion bolts.
Note
Do not immerse the pedestal in the water. In special circumstances, the immersed height should
be no more than 690 mm.
6.
Install the arms with 3 screws.
Note
Apply thread glue on the screws before securing the arms, in order to prevent the arms from
dropping down because of the vibraon or the long me usage of the device.
DS-K3G501LX Series Tripod Turnsle User Manual
8
Loading ...
Loading ...
Loading ...