Loading ...
Loading ...
Loading ...
Chapter 4 General Wiring
4.1 Components Introducon
By default, basic components of the turnsle are connected well. The turnsle supports wiring the
AC electric supply for the whole system's power supply.
Note
The voltage uctuaon of the electric supply is between 100 VAC and 240 VAC, 50 to 60 Hz.
The picture displayed below describes each component's posion on the turnsle.
Figure 4-1 Components Diagram
4.2 Wiring Electric Supply
Wire electric supply with the switch in the pedestal. Terminal L (brown) and terminal N (Blue) are
on the switch, while terminal PE should connect to a ground wire (yellow and green wire).
For product with switching power supply, the wiring diagram is as follows:
DS-K3G501LX Series Tripod Turnsle User Manual
9
Loading ...
Loading ...
Loading ...