Loading ...
Loading ...
Loading ...
35
AXIS Q6032-E - System Options
Traps for SNMP v1/v2
Traps are used by the camera to send messages to a mana
gement system for important events or status changes.
If En
able traps is selected, enter the email address where the trap message is to be sent as well as the Trap community that
should receive the message.
There are four types of traps available for the network camer
a.
• Cold start
•Warm start
•Link up
• Authentication failed
SNMP v3
SNMP v3 provides encryption and secure passwords. HTTPS mu
st be enabled. To use traps with SNMP v3 an SNMP v3
management application is required.
If the Enable S
NMP v3 option is enabled, provide the Initial user password. Note that the initial password is activated only
when HTTPS is enabled and can only be set once.
If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.
When SNMP configuration is ready, click Save to u
se the new settings or Reset to return to the default values.
UPnP™
The network camera includes support for UPnP™. UPnP™ is enabled by default, and the network camera then is automatically
detected by operating systems and clients that support this protocol.
RTP/H.264
These settings are the port range, IP address, port number, and Time-To-Live value to use for the video stream(s) in multicast
H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. For more information, please
see the online help.
Bonjour
The network camera includes support for Bonjour. When enabled, the camera is automatically detected by operating systems
and clients that support this.
Storage
SD Card
The Disk Management window is used to set up and manage local storage. it is used to connect memory cards for recording
video, monitoring a disk’s status, enabling automatic cleanup and preventing the memory card from being overwritten.
Storage Device
Storage device is used to identify and monitor the status of the SD
card. it shows the size of the SD card and how much free
space is available for storage. It is also used to mount and format SD cards for local storage.
Storage Device Settings
Storage device settings is used to configure removal of recorded video. Automatic disk cleanup can be enabled and set up
according to a schedule, and an SD card can be locked to prevent storage removal.
Loading ...
Loading ...
Loading ...