Loading ...
Loading ...
Loading ...
- 26 -
Before you install the cooktop, make sure that
• The work surface is square and level, and no structural members interfere
with space requirements.
• The work surface is made of a heat-resistant material.
• If the cooktop is installed above an oven, the oven has a built-in cooling fan.
•
The installation will comply with all clearance requirements and applicable
standards and regulations.
• A suitable isolating switch providing full disconnection from the mains power
supply is incorporated in the permanent wiring, mounted and positioned to
comply with the local wiring rules and regulations.
• The isolating switch must be of an approved type and provide a 0.12in air
gap contact separation in all poles (or in all active [phase] conductors if the
local wiring rules allow for this variation of the requirements).
• The isolating switch will be easily accessible to the customer with the
cooktop installed.
• You consult local building authorities and by-laws if in doubt regarding
installation.
• You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for
the wall surfaces surrounding the cooktop.
When you have installed the cooktop, make sure that
• The power supply cable is not accessible through cupboard doors or
drawers.
• There is adequate flow of air from outside the cabinetry to the base of the
cooktop.
•
If the cooktop is installed above a drawer or cupboard space, a thermal
protection barrier is installed below the base of the cooktop.
• The isolating switch is easily accessible by the customer.
Loading ...
Loading ...
Loading ...