Loading ...
Loading ...
Loading ...
- 22 -
The induction cooktop or
a cooking zone has
turned itself off
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating with
one or two digits in the
cooking timer display).
Technical fault.
Please note down the error
letters and numbers, switch
the power to the induction cooktop
off at the wall, and contact a
qualified technician.
Failure Display and Inspection
If an abnormality comes up, the induction cooktop will enter the protective state
automatically and display corresponding protective codes:
Problem
Possible causes
What to do
E4/E5
Temperature sensor failure
Please contact the supplier.
E7/E8
Temperature sensor of the
IGBT failure.
Please contact the supplier.
E2/E3
Abnormal supply voltage
Please inspect whether power
supply is normal. Power on after
the power supply is normal.
E6/E9
Bad induction cooktop heat
radiation
Please restart after the induction
cooktop cools down.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction cooktop.
Loading ...
Loading ...
Loading ...