Loading ...
Loading ...
Loading ...
26
27
Door does not lock during cleaning.
Use caution.
WARNING
CLEANING COOKTOP
Please follow these directions along with Important Safety steps for cleaning, advised
at the beginning of the manual. Use a ceramic glass cleaner on the glass cooktop. To
maintain and protect the surface of your glass cooktop, follow these steps:
1. Before using the cooktop for the first time, clean it to protect the top and makes
cleanup easier.
2. Daily use of ceramic glass cleaner when the cooktop is cool will keep the
cooktop looking new.
3. Shake the cleaning solution well. Apply a few drops of ceramic glass cleaner
directly to the cooktop.
4. Use a paper towel or a soft cleaning pad for ceramic surface to clean the entire
cooktop surface.
5. Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse.
6. Never run the cooktop under water.
CLEANING BURNED ON RESIDUE
1. NOTE: It is very important that you DO NOT use the cooktop until it has been
thoroughly cleaned. WARNING: Damage to the glass surface may occur if you
use scrub pads or any other type of abrasive cleaning materials.
2. Allow the cooktop to cool.
3. Spread a few drops of the ceramic glass cleaner on the burned residue area.
4. Using the ceramic glass cleaning pad, rub the residue area, applying pressure as
needed.
5. If any residue remains, repeat the steps listed above.
6. For additional protection, after all residue has been removed, polish the entire
surface with the ceramic glass cleaner and a paper towel.
During cleaning operation, never move the appliance from its original
installation position. Never use abrasive cleaners! Scratches on the stainless
steel surfaces are permanent. Do NOT clean the range when hot!
WARNING
MAINTENANCE AND CLEANING MAINTENANCE AND CLEANING
Cleaning the Range
CLEANING HEAVY BURNED - ON RESIDUE
1. Allow the cooktop to cool.
2. Used a single edge razor blade scraper approximately at a 45 degree angle
against the glass surface, and scrape off the residue.
3. After scraping off the residue, apply a few drops of the ceramic glass cleaner on
the entire burned residue area. Use the cleaning pad to remove any remaining
residue.
4. For additional protection, after all residue has been removed, polish the entire
surface with the ceramic glass cleaner and a paper towel.
METAL MARKS AND SCRATCHES:
• Be careful not to slide pots or pans across the cooktop surface. It will leave
behind metal markings. These marks are removable using the ceramic glass
cleaner along with the cleaning pad for induction cooktop.
• If pots with a thin overlay of aluminum or copper boil dry, the overlay may
leave a black discoloration on the cooktop. This should be removed immediately
before using the cooktop again or the discoloration will become permanent.
• NOTE: If cracks or indentations in the glass surface occurs, the cooktop glass will
have to be replaced. Contact the manufacturer for assistance.
CLEANING STAINLESS STEEL
For best results, use a stainless steel cleaner product with a soft sponge or wipe.
Alternatively, use a soft sponge or cloth with a warm soap and water solution. Never
use abrasive powders or liquids!
Cleaning the Range
Loading ...
Loading ...
Loading ...