Loading ...
Loading ...
Loading ...
USING YOUR 3-IN-1 CLEANER
POWER
HARD FLOOR MODE FRESHEN MODE
MAINTAINING YOUR 3-IN-1 CLEANER
1. Place the unit on the Storage and Charging Dock.
The Self-Clean mode icon located on the top of
the main body will pulse.
2. Empty the Dirty Water Tank and make sure the
clean solution tank is at least half full.
3. Press the Power Button to start the self-clean
cycle. The icon will pulse for the full 2-minute
duration of the cycle
4. DO NOT remove the unit from the dock during
the self-clean cycle. The icon will turn o when the
cycle is complete.
5. Empty the dirty water tank.
See LED Glossary for more information on
indicator lights during self-clean cycle.
Press and release the Power button on the handle
to turn on power. To turn o power, press the
button again.
Use Hard Floor mode for powerful cleaning on bare
floors. To activate Hard Floor mode, turn on the unit
and tilt the handle back.
To clean area rugs, press the Freshen Mode icon on
top of the handle. The Freshen Mode light on the
main body will illuminate. To turn o Freshen Mode,
press the button again.
CONTROLS SELF-CLEANING MODE
The self-clean cycle automatically cleans the system and the brush-roll.
Recommended after every use
CLEANING MODES
NOTE: Make sure the Clean Solution Tank is at least half full and that the dirty water tank is empty before running the self-
cleaning cycle.
NOTE: To prevent leakage, DO NOT place the main body on the floor. The nozzle should always be kept flat on the floor.
NOTE: If you encounter a dicult stain, use Freshen Mode for improved stain cleaning.
NOTE: If you encounter a stubborn odor on your floor or area rug, continue to clean in Freshen Mode until the odor is gone.
NOTE: If your floors are cloudy, streaky, or spotty after cleaning, it may be due to accumulated soap or grease residue. The
floor may require several cleanings with the Hydrovac.
sharkclean.co.uksharkclean.co.uk
Loading ...
Loading ...
Loading ...