Cordless 3-in-1 Cleaner
WD200UK Series
INSTRUCTION BOOKLET
1. If the charging cord plug does not fit
fully into the outlet, contact the place of
purchase. DO NOT force into outlet or try
to modify to fit.
2. To reduce the risk of shock and
unintended operation, turn o power
before servicing.
3. This 3-in-1 Cleaner consists of a
motorised nozzle, main body, pole, and
handle. These components contain
electrical connections, electrical wiring,
and moving parts that potentially present
risk to the user.
4. Before each use, carefully inspect
all parts for any damage. If a part is
damaged, discontinue use.
5. Use only identical replacement parts.
6. Use only as described in this manual.
DO NOT use the 3-in-1 Cleaner for any
purpose other than those described in
this manual.
7. DO NOT immerse or spray water on the
body of the 3-in-1 Cleaner. To clean the
surface, wipe with a dry cloth.
8. Keep the 3-in-1 Cleaner and dock’s cord
out of reach of children. Do not allow
the appliance to be used by children.
Do not allow to be used as a toy. Close
supervision is necessary when used
near children.
9. This appliance can be used by persons
with reduced physical, sensory, or
mental capabilities or lack of experience
or knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way
and understand the hazards involved.
Cleaning and user maintenance should
not be done by children.
10. Always turn o the 3-in-1 Cleaner
before connecting or disconnecting any
motorised nozzles, chargers, batteries, or
other electrical or mechanical parts.
11. DO NOT handle plug or 3-in-1 Cleaner
with wet hands.
12. DO NOT use without the dirty water
tank, Clean Solution Tank, filter,
brushroll, and brushroll cover in place.
13. Use only the charger that came with
your unit. Use of an incorrect charger
may result in no charging, and/or unsafe
condition.
14. Only use Shark® branded filters and
accessories.
15. DO NOT put any objects into nozzle
or accessory openings. DO NOT use
with any opening blocked; keep free of
dust, lint, hair, and anything that may
reduce airflow.
16. DO NOT use if nozzle or accessory
airflow is restricted. If the air paths or
the motorised floor nozzle become
blocked, turn the 3-in-1 Cleaner o.
Remove all obstructions before you turn
on the unit again.
17. Keep nozzle and all 3-in-1 Cleaner
openings away from hair, face, fingers,
uncovered feet, or loose clothing.
18. DO NOT use if 3-in-1 Cleaner is not
working as it should, or has been
dropped, damaged, left outdoors, or
dropped into water.
19. Use extra care when cleaning on stairs.
20. DO NOT leave the 3-in-1 Cleaner
unattended while powered on.
21. When powered on, always keep
the 3-in-1 Cleaner moving over the
carpet surface to avoid damaging the
carpet fibres.
22. DO NOT place 3-in-1 Cleaner on unstable
surfaces such as chairs or tables.
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY READ ALL INSTRUCTIONS BEFORE USING THIS 3-IN-1 CLEANER
SAVE THESE INSTRUCTIONS
23. DO NOT use to pick up:
a) Large objects
b) Hard or sharp objects (nails, screws,
or coins)
c) Large quantities of dust (including
drywall, fireplace ash, or embers).
d) Smoking or burning objects (hot coals,
cigarette butts, or matches)
e) Flammable or combustible materials
(lighter fluid, petrol, or kerosene)
f) Toxic materials (chlorine bleach,
ammonia, or drain cleaner)
24. DO NOT use in the following areas:
a) Poorly lit areas
b) Outdoor areas
c) Spaces that are enclosed and may
contain explosive or toxic fumes or
vapours (lighter fluid, petrol, kerosene,
paint, paint thinners, mothproofing
substances, or flammable dust)
25. Turn o the 3-in-1 Cleaner before
adjustment, cleaning, maintenance or
troubleshooting
26. During cleaning or routine maintenance,
DO NOT cut anything other than hair,
fibres, or string wrapped around the
brushroll
27. Allow all filters to air dry completely
before replacing in the 3-in-1 Cleaner
to prevent liquid from being drawn into
electric parts.
28. DO NOT modify or attempt to repair the
3-in-1 Cleaner or the battery yourself,
except as indicated in this manual.
DO NOT use the battery or 3-in-1 Cleaner
if it has been modified or damaged.
Damaged or modified batteries may
exhibit unpredictable behaviour resulting
in fire, explosion, or risk of injury.
29. Use only Shark brand cleaning fluids
intended for use with this appliance to
prevent internal component damage.
BATTERY PACK
30. The battery is the power source for the
3-in-1 Cleaner. Carefully read and follow
all charging instructions.
31. To prevent unintentional starting, ensure
the 3-in-1 Cleaner is powered o before
picking up or carrying the 3-in-1 Cleaner.
DO NOT carry the appliance with your
finger on the power switch.
32. The battery pack is non-serviceable. Call
our customer services helpline with any
questions and concerns.
33. Under abusive conditions, liquid may
be ejected from the battery. Avoid
contact with this liquid, as it may cause
irritation or burns. If contact occurs, flush
with water. If liquid contacts eyes, seek
medical help.
34. DO NOT charge battery at temperatures
below 5° C (40° F) or above 40° C (104° F).
35. Store the unit indoors. DO NOT use or
store it below 3° C (37.4° F). Ensure the
appliance is at room temperature before
operating.
36. DO NOT expose the battery to fire or
temperatures above 130° C (265° F) as it
may explode.
37. Battery should not be stored at
temperatures below 3° C (37.4° F) or
above 40° C (104° F) to maintain long
term battery life.
sharkclean.co.uksharkclean.co.uk
1. If the charging cord plug does not fit
fully into the outlet, contact the place of
purchase. DO NOT force into outlet or try
to modify to fit.
2. To reduce the risk of shock and
unintended operation, turn o power
before servicing.
3. This 3-in-1 Cleaner consists of a
motorised nozzle, main body, pole, and
handle. These components contain
electrical connections, electrical wiring,
and moving parts that potentially present
risk to the user.
4. Before each use, carefully inspect
all parts for any damage. If a part is
damaged, discontinue use.
5. Use only identical replacement parts.
6. Use only as described in this manual.
DO NOT use the 3-in-1 Cleaner for any
purpose other than those described in
this manual.
7. DO NOT immerse or spray water on the
body of the 3-in-1 Cleaner. To clean the
surface, wipe with a dry cloth.
8. Keep the 3-in-1 Cleaner and dock’s cord
out of reach of children. Do not allow
the appliance to be used by children.
Do not allow to be used as a toy. Close
supervision is necessary when used
near children.
9. This appliance can be used by persons
with reduced physical, sensory, or
mental capabilities or lack of experience
or knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way
and understand the hazards involved.
Cleaning and user maintenance should
not be done by children.
10. Always turn o the 3-in-1 Cleaner
before connecting or disconnecting any
motorised nozzles, chargers, batteries, or
other electrical or mechanical parts.
11. DO NOT handle plug or 3-in-1 Cleaner
with wet hands.
12. DO NOT use without the dirty water
tank, Clean Solution Tank, filter,
brushroll, and brushroll cover in place.
13. Use only the charger that came with
your unit. Use of an incorrect charger
may result in no charging, and/or unsafe
condition.
14. Only use Shark® branded filters and
accessories.
15. DO NOT put any objects into nozzle
or accessory openings. DO NOT use
with any opening blocked; keep free of
dust, lint, hair, and anything that may
reduce airflow.
16. DO NOT use if nozzle or accessory
airflow is restricted. If the air paths or
the motorised floor nozzle become
blocked, turn the 3-in-1 Cleaner o.
Remove all obstructions before you turn
on the unit again.
17. Keep nozzle and all 3-in-1 Cleaner
openings away from hair, face, fingers,
uncovered feet, or loose clothing.
18. DO NOT use if 3-in-1 Cleaner is not
working as it should, or has been
dropped, damaged, left outdoors, or
dropped into water.
19. Use extra care when cleaning on stairs.
20. DO NOT leave the 3-in-1 Cleaner
unattended while powered on.
21. When powered on, always keep
the 3-in-1 Cleaner moving over the
carpet surface to avoid damaging the
carpet fibres.
22. DO NOT place 3-in-1 Cleaner on unstable
surfaces such as chairs or tables.
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY READ ALL INSTRUCTIONS BEFORE USING THIS 3-IN-1 CLEANER
SAVE THESE INSTRUCTIONS
23. DO NOT use to pick up:
a) Large objects
b) Hard or sharp objects (nails, screws,
or coins)
c) Large quantities of dust (including
drywall, fireplace ash, or embers).
d) Smoking or burning objects (hot coals,
cigarette butts, or matches)
e) Flammable or combustible materials
(lighter fluid, petrol, or kerosene)
f) Toxic materials (chlorine bleach,
ammonia, or drain cleaner)
24. DO NOT use in the following areas:
a) Poorly lit areas
b) Outdoor areas
c) Spaces that are enclosed and may
contain explosive or toxic fumes or
vapours (lighter fluid, petrol, kerosene,
paint, paint thinners, mothproofing
substances, or flammable dust)
25. Turn o the 3-in-1 Cleaner before
adjustment, cleaning, maintenance or
troubleshooting
26. During cleaning or routine maintenance,
DO NOT cut anything other than hair,
fibres, or string wrapped around the
brushroll
27. Allow all filters to air dry completely
before replacing in the 3-in-1 Cleaner
to prevent liquid from being drawn into
electric parts.
28. DO NOT modify or attempt to repair the
3-in-1 Cleaner or the battery yourself,
except as indicated in this manual.
DO NOT use the battery or 3-in-1 Cleaner
if it has been modified or damaged.
Damaged or modified batteries may
exhibit unpredictable behaviour resulting
in fire, explosion, or risk of injury.
29. Use only Shark brand cleaning fluids
intended for use with this appliance to
prevent internal component damage.
BATTERY PACK
30. The battery is the power source for the
3-in-1 Cleaner. Carefully read and follow
all charging instructions.
31. To prevent unintentional starting, ensure
the 3-in-1 Cleaner is powered o before
picking up or carrying the 3-in-1 Cleaner.
DO NOT carry the appliance with your
finger on the power switch.
32. The battery pack is non-serviceable. Call
our customer services helpline with any
questions and concerns.
33. Under abusive conditions, liquid may
be ejected from the battery. Avoid
contact with this liquid, as it may cause
irritation or burns. If contact occurs, flush
with water. If liquid contacts eyes, seek
medical help.
34. DO NOT charge battery at temperatures
below 5° C (40° F) or above 40° C (104° F).
35. Store the unit indoors. DO NOT use or
store it below 3° C (37.4° F). Ensure the
appliance is at room temperature before
operating.
36. DO NOT expose the battery to fire or
temperatures above 130° C (265° F) as it
may explode.
37. Battery should not be stored at
temperatures below 3° C (37.4° F) or
above 40° C (104° F) to maintain long
term battery life.
sharkclean.co.uksharkclean.co.uk
ASSEMBLY
NOTE: The Shark® battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of
a new battery.
NOTE: When assembling your HydroVac, there may be a little water in or around the water tanks. This is because we test all
our HydroVacs before you buy them to ensure the highest quality.
NOTE: To remove the handle, press the release button located on the back of the unit with a thin tool while pulling up on the handle.
(Click)
Handle
Pole
Main Body Cord Wrap
DockFloorhead
1. Align the Pole with the opening in the
Main Body and insert it until it clicks into
place.
2. Place the Storage and Charging Dock
on the floor near a wall outlet and plug
in the cord. Wind the remaining cord
around the Cord Wrap on the back of
the dock.
Prior to first use, charge the battery completely. A full charge takes approximately 4 hours.
LI-ION BATTERY
Visit sharkclean.com/support online.
LED BATTERY POWER AND CHARGING INDICATOR
RUNTIME FOR FULLY CHARGED BATTERY
Charging
In Use
Low Charge
Mid Charge
Nearly Full
Full Charge
Full Charge
Mid Charge
Nearly Empty (Pulsing)
No Charge
Note: Full Charge takes approximately 4 hours.
sharkclean.co.uksharkclean.co.uk
ASSEMBLY
NOTE: The Shark® battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of
a new battery.
NOTE: When assembling your HydroVac, there may be a little water in or around the water tanks. This is because we test all
our HydroVacs before you buy them to ensure the highest quality.
NOTE: To remove the handle, press the release button located on the back of the unit with a thin tool while pulling up on the handle.
(Click)
Handle
Pole
Main Body Cord Wrap
DockFloorhead
1. Align the Pole with the opening in the
Main Body and insert it until it clicks into
place.
2. Place the Storage and Charging Dock
on the floor near a wall outlet and plug
in the cord. Wind the remaining cord
around the Cord Wrap on the back of
the dock.
Prior to first use, charge the battery completely. A full charge takes approximately 4 hours.
LI-ION BATTERY
Visit sharkclean.com/support online.
LED BATTERY POWER AND CHARGING INDICATOR
RUNTIME FOR FULLY CHARGED BATTERY
Charging
In Use
Low Charge
Mid Charge
Nearly Full
Full Charge
Full Charge
Mid Charge
Nearly Empty (Pulsing)
No Charge
Note: Full Charge takes approximately 4 hours.
sharkclean.co.uksharkclean.co.uk
USING YOUR 3-IN-1 CLEANER
Press the release button and lift o the Clean Solution Tank.
NOTE: When docked properly, the charging lights on the Main Body will blink, indicating that charging has begun. When
charging is complete, all three indicator lights will turn o.
NOTE: The main unit comes with a partial charge. For maximum runtime, charge fully before first use (approximately 4
hours). Leaving the unit plugged in will not damage battery life.
NOTE: Only use Shark HydroVac Multi-Surface Cleaning Solution and water with this product.
NOTE: Be sure to not overfill the Clean Solution Tank with more HydroVac Multi Surface Concentrate than instructed, as this
may clause streaking
NOTE: Without sucient water supply in the clean solution tank, HydroVac will not run.
USING YOUR 3-IN-1 CLEANER
CHARGING ON THE DOCK
CORD WRAP
STORAGE AND
CHARGING DOCK
DOCK CHARGING
Charge the unit by placing it on the Storage and Charging Dock. Make sure the contacts on the body are
aligned with the contacts on the charging dock.
The Battery Icon on the main body will illuminate when charging begins.
When charging is complete and you need to use the unit again, lift it o the dock.
FILLING THE CLEAN SOLUTION TANK
REMOVE THE CLEAN SOLUTION TANK
1
FILL THE CLEAN SOLUTION TANK
Unscrew the cap and add water to the tank, up to the WATER line. Next, add Shark HydroVac™ Multi-Surface
Cleaning Solution, filling to the SOLUTION line. Replace the cap and reinsert the tank until it clicks into place.
The top of the tank should be flush with the top of the body.
2
sharkclean.co.uksharkclean.co.uk
USING YOUR 3-IN-1 CLEANER
Press the release button and lift o the Clean Solution Tank.
NOTE: When docked properly, the charging lights on the Main Body will blink, indicating that charging has begun. When
charging is complete, all three indicator lights will turn o.
NOTE: The main unit comes with a partial charge. For maximum runtime, charge fully before first use (approximately 4
hours). Leaving the unit plugged in will not damage battery life.
NOTE: Only use Shark HydroVac Multi-Surface Cleaning Solution and water with this product.
NOTE: Be sure to not overfill the Clean Solution Tank with more HydroVac Multi Surface Concentrate than instructed, as this
may clause streaking
NOTE: Without sucient water supply in the clean solution tank, HydroVac will not run.
USING YOUR 3-IN-1 CLEANER
CHARGING ON THE DOCK
CORD WRAP
STORAGE AND
CHARGING DOCK
DOCK CHARGING
Charge the unit by placing it on the Storage and Charging Dock. Make sure the contacts on the body are
aligned with the contacts on the charging dock.
The Battery Icon on the main body will illuminate when charging begins.
When charging is complete and you need to use the unit again, lift it o the dock.
FILLING THE CLEAN SOLUTION TANK
REMOVE THE CLEAN SOLUTION TANK
1
FILL THE CLEAN SOLUTION TANK
Unscrew the cap and add water to the tank, up to the WATER line. Next, add Shark HydroVac™ Multi-Surface
Cleaning Solution, filling to the SOLUTION line. Replace the cap and reinsert the tank until it clicks into place.
The top of the tank should be flush with the top of the body.
2
sharkclean.co.uksharkclean.co.uk
USING YOUR 3-IN-1 CLEANER
POWER
HARD FLOOR MODE FRESHEN MODE
MAINTAINING YOUR 3-IN-1 CLEANER
1. Place the unit on the Storage and Charging Dock.
The Self-Clean mode icon located on the top of
the main body will pulse.
2. Empty the Dirty Water Tank and make sure the
clean solution tank is at least half full.
3. Press the Power Button to start the self-clean
cycle. The icon will pulse for the full 2-minute
duration of the cycle
4. DO NOT remove the unit from the dock during
the self-clean cycle. The icon will turn o when the
cycle is complete.
5. Empty the dirty water tank.
See LED Glossary for more information on
indicator lights during self-clean cycle.
Press and release the Power button on the handle
to turn on power. To turn o power, press the
button again.
Use Hard Floor mode for powerful cleaning on bare
floors. To activate Hard Floor mode, turn on the unit
and tilt the handle back.
To clean area rugs, press the Freshen Mode icon on
top of the handle. The Freshen Mode light on the
main body will illuminate. To turn o Freshen Mode,
press the button again.
CONTROLS SELF-CLEANING MODE
The self-clean cycle automatically cleans the system and the brush-roll.
Recommended after every use
CLEANING MODES
NOTE: Make sure the Clean Solution Tank is at least half full and that the dirty water tank is empty before running the self-
cleaning cycle.
NOTE: To prevent leakage, DO NOT place the main body on the floor. The nozzle should always be kept flat on the floor.
NOTE: If you encounter a dicult stain, use Freshen Mode for improved stain cleaning.
NOTE: If you encounter a stubborn odor on your floor or area rug, continue to clean in Freshen Mode until the odor is gone.
NOTE: If your floors are cloudy, streaky, or spotty after cleaning, it may be due to accumulated soap or grease residue. The
floor may require several cleanings with the Hydrovac.
sharkclean.co.uksharkclean.co.uk
USING YOUR 3-IN-1 CLEANER
POWER
HARD FLOOR MODE FRESHEN MODE
MAINTAINING YOUR 3-IN-1 CLEANER
1. Place the unit on the Storage and Charging Dock.
The Self-Clean mode icon located on the top of
the main body will pulse.
2. Empty the Dirty Water Tank and make sure the
clean solution tank is at least half full.
3. Press the Power Button to start the self-clean
cycle. The icon will pulse for the full 2-minute
duration of the cycle
4. DO NOT remove the unit from the dock during
the self-clean cycle. The icon will turn o when the
cycle is complete.
5. Empty the dirty water tank.
See LED Glossary for more information on
indicator lights during self-clean cycle.
Press and release the Power button on the handle
to turn on power. To turn o power, press the
button again.
Use Hard Floor mode for powerful cleaning on bare
floors. To activate Hard Floor mode, turn on the unit
and tilt the handle back.
To clean area rugs, press the Freshen Mode icon on
top of the handle. The Freshen Mode light on the
main body will illuminate. To turn o Freshen Mode,
press the button again.
CONTROLS SELF-CLEANING MODE
The self-clean cycle automatically cleans the system and the brush-roll.
Recommended after every use
CLEANING MODES
NOTE: Make sure the Clean Solution Tank is at least half full and that the dirty water tank is empty before running the self-
cleaning cycle.
NOTE: To prevent leakage, DO NOT place the main body on the floor. The nozzle should always be kept flat on the floor.
NOTE: If you encounter a dicult stain, use Freshen Mode for improved stain cleaning.
NOTE: If you encounter a stubborn odor on your floor or area rug, continue to clean in Freshen Mode until the odor is gone.
NOTE: If your floors are cloudy, streaky, or spotty after cleaning, it may be due to accumulated soap or grease residue. The
floor may require several cleanings with the Hydrovac.
sharkclean.co.uksharkclean.co.uk
MAINTAINING YOUR 3-IN-1 CLEANER MAINTAINING YOUR 3-IN-1 CLEANER
1. To access the brushroll, press the button on the top
of the nozzle and lift o the brushroll cover.
1. To remove the dirty water tank, press the release
button and pull out the tank.
2. Remove the brushroll by pulling up on the pull tab on
the left side of the nozzle.
Wash thoroughly with warm water. Allow the
brushroll to air-dry completely in a well-ventilated
area for at least 24 hours.
2. To dispose of liquid waste only, pour it out though
the Express Clean Spout on the back of the dirty
water tank.
3. Reinsert the brushroll by lining up the grooves on the
end of the brushroll with the helix on the inner right side
of the nozzle, then press down on the left side of the
brushroll. When properly installed, the brushroll tab will
be flush with the left side of the nozzle.
3. To dispose of solid debris, lift out the Solids
Separator. Grasp the recessed areas on the sides of
the separator and lift it out. Empty the solid debris
into the bin. If any liquid waste remains in the tank,
pour it down a drain. To clean, rinse the separator
and the tank with water.
4. To reinstall the brushroll cover, insert the hooks on
the bottom of the cover into the unit first. Press
down on the cover until it clicks into place.
4. Clean the filter in the top of the solids separator
every month. Pull out the filter and hand-wash
with warm water and soap. Allow the filter to
air-dry completely in a well-ventilated area before
reinstalling it.
MANUALLY CLEANING THE BRUSHROLL CLEANING THE DIRTY WATER TANK
NOTE: Do not place brushroll in washing machine or dishwasher. Replace the brushroll after 6 months.
NOTE: Replace the filter every 6 Months.
NOTE: Do not place dirty water tank in washing machine or dishwasher.
You can clean the brushroll by hand as an alternative to the self-clean cycle,
and to remove debris or hair wrapped around the brushroll.
1
2
1
3
2
4
1
1
2
1 2
3 4
Pull
from here
sharkclean.co.uksharkclean.co.uk
MAINTAINING YOUR 3-IN-1 CLEANER MAINTAINING YOUR 3-IN-1 CLEANER
1. To access the brushroll, press the button on the top
of the nozzle and lift o the brushroll cover.
1. To remove the dirty water tank, press the release
button and pull out the tank.
2. Remove the brushroll by pulling up on the pull tab on
the left side of the nozzle.
Wash thoroughly with warm water. Allow the
brushroll to air-dry completely in a well-ventilated
area for at least 24 hours.
2. To dispose of liquid waste only, pour it out though
the Express Clean Spout on the back of the dirty
water tank.
3. Reinsert the brushroll by lining up the grooves on the
end of the brushroll with the helix on the inner right side
of the nozzle, then press down on the left side of the
brushroll. When properly installed, the brushroll tab will
be flush with the left side of the nozzle.
3. To dispose of solid debris, lift out the Solids
Separator. Grasp the recessed areas on the sides of
the separator and lift it out. Empty the solid debris
into the bin. If any liquid waste remains in the tank,
pour it down a drain. To clean, rinse the separator
and the tank with water.
4. To reinstall the brushroll cover, insert the hooks on
the bottom of the cover into the unit first. Press
down on the cover until it clicks into place.
4. Clean the filter in the top of the solids separator
every month. Pull out the filter and hand-wash
with warm water and soap. Allow the filter to
air-dry completely in a well-ventilated area before
reinstalling it.
MANUALLY CLEANING THE BRUSHROLL CLEANING THE DIRTY WATER TANK
NOTE: Do not place brushroll in washing machine or dishwasher. Replace the brushroll after 6 months.
NOTE: Replace the filter every 6 Months.
NOTE: Do not place dirty water tank in washing machine or dishwasher.
You can clean the brushroll by hand as an alternative to the self-clean cycle,
and to remove debris or hair wrapped around the brushroll.
1
2
1
3
2
4
1
1
2
1 2
3 4
Pull
from here
sharkclean.co.uksharkclean.co.uk
MAINTAINING YOUR 3-IN-1 CLEANER
5. After cleaning the dirty water tank and the solids
separator, allow them to air-dry in a well-ventilated
area for at least 24 hours. To reinstall the tank, insert
the bottom into the opening in the main body, then
tilt the tank back until it clicks into place.
5
1. Turn o the power.
2. Remove the brushroll cover, brushroll, and dirty
water tank.
3. Check the openings and remove all debris.
4. When finished, reinstall the brushroll and the cover.
CHECKING FOR BLOCKAGES
If you run over a hard or sharp object or notice a noise change while using your unit, check for blockages or
objects caught in the brushroll, nozzle chamber, or inlet hose.
MAINTAINING YOUR 3-IN-1 CLEANER
NOTE: If 3-in-1 Cleaner still does not operate properly, contact Customer Service at +44 (0)800 862 0453 or
www.sharkclean.co.uk
ORDERING REFILLS AND PARTS
Replace the filter and brushroll every 6 months.
Only use Shark HydroVac Concentrate or water with the Shark HydroVac.
To order brushrolls, filters, Shark HydroVac Multi-Surface Concentrate,
please visit sharkclean.co.uk or scan the QR code below.
sharkclean.co.uksharkclean.co.uk
MAINTAINING YOUR 3-IN-1 CLEANER
5. After cleaning the dirty water tank and the solids
separator, allow them to air-dry in a well-ventilated
area for at least 24 hours. To reinstall the tank, insert
the bottom into the opening in the main body, then
tilt the tank back until it clicks into place.
5
1. Turn o the power.
2. Remove the brushroll cover, brushroll, and dirty
water tank.
3. Check the openings and remove all debris.
4. When finished, reinstall the brushroll and the cover.
CHECKING FOR BLOCKAGES
If you run over a hard or sharp object or notice a noise change while using your unit, check for blockages or
objects caught in the brushroll, nozzle chamber, or inlet hose.
MAINTAINING YOUR 3-IN-1 CLEANER
NOTE: If 3-in-1 Cleaner still does not operate properly, contact Customer Service at +44 (0)800 862 0453 or
www.sharkclean.co.uk
ORDERING REFILLS AND PARTS
Replace the filter and brushroll every 6 months.
Only use Shark HydroVac Concentrate or water with the Shark HydroVac.
To order brushrolls, filters, Shark HydroVac Multi-Surface Concentrate,
please visit sharkclean.co.uk or scan the QR code below.
sharkclean.co.uksharkclean.co.uk
LED GLOSSARY LED GLOSSARY
SCENARIO
VISUAL DETAILS
UNIT IS IN USE
Single battery icon is on.
Solid. Battery low. Note - you will not be able to run a self-clean cycle.
Self-clean icon is pulsing.
Pulsing
Place unit on dock while self-clean icon is pulsing. Press the power button to run
self-clean cycle.
Single battery icon is pulsing.
Pulsing
Battery is close to running out.
Self-clean icon has turned o.
O
Insucient battery life to run self-clean cycle after use.
UNIT IS IN PLACED ON THE DOCK
Battery icons are pulsing.
Pulsing
Unit is charging.
Self-clean icon is on.
On
There is sucient battery life to run a self-clean cycle.
Press the power button to run a self-clean cycle.
Self-clean icon is o.
O
There is not sucient battery life to run self-clean cycle.
Wait until self-clean icon turns on to run a self-clean cycle.
Power button is pressed to activate self-
clean cycle. Battery Icons and Self-clean
icon flash three times.
Flash ×3
Unit is charging. There is not sucient battery life to run a self-clean cycle.
Wait until self-clean icon turns on to run a self-clean cycle.
Power button is pressed to activate self-
clean cycle. Self-clean icon is pulsing.
Pulsing
Self-clean cycle is running. Self-clean icon will turn o when cycle is complete.
Battery icons will turn on and unit will begin charging.
Self-clean cycle IS IN PROCESS; self-
clean cycle PAUSES
Self-clean icon is flashing
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill clean solution tank and press the power button to
resume self-clean cycle.
Self-clean icon is flashing
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty dirty water tank and press the power button to
resume self-clean cycle.
UNIT IS IN USE;
CLEANING FUNCTIONS TURN OFF
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill clean solution tank, press the power button to
resume cleaning.
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty dirty water tank. Press the power button, resume
cleaning. *If this is a false error, remove the solids separator and clean completely.
Allow part to dry for 24 hours or dry manually.
Red water droplet icon is flashing.
Red Freshen Mode icon is flashing.
Flashing
Brushroll cover has been removed. Attach brushroll cover. Press the power button to
resume cleaning.
Red water droplet icon is flashing.
Red Freshen Mode icon is flashing.
Flashing out of sync
Brushroll is jammed. Remove brushroll cover and brushroll. Remove any object that
may be causing the brushroll to jam. Press the power button resume cleaning.
SCENARIO VISUAL
DETAILS
UNIT IS IN USE
Single battery icon is on. Solid.
Battery low. Note - you will not be able to run a Self-clean cycle.
Self-clean icon is pulsing.
Pulsing
Place unit on dock while Self-clean icon is pulsing. Press Power button to run Self-
clean cycle.
Single battery icon is pulsing.
Pulsing
Battery is close to running out.
Self-clean icon has turned o.
O
Insucient battery life needed to run Self-Clean Cycle after use.
UNIT IS PLACED ON THE DOCK
Battery icons are pulsing.
Pulsing
Unit is charging
Self-clean icon is on.
On
There is sucient battery life to run a Self-clean cycle
Press Power button to run a Self-clean cycle
Self-clean icon is o.
O
There is not sucient battery life to run Self-clean cycle
Wait until Self-clean turns on to run a Self-clean cycle
Power button is pressed to activate self-
clean cycle. Battery icons and self-clean
icon flash three times.
Flash ×3
Unit is charging. There is not sucient battery life to run a Self-clean cycle
Wait until Self-clean icon turns on to run a Self-clean cycle
Power button is pressed to activate self-
clean cycle. Self-clean icon is pulsing.
Pulsing
Self-clean cycle is running. Self-clean icon will turn o when cycle is complete.
Battery icons will turn on and unit will begin charging
SELF-CLEAN CYCLE IS IN PROCESS;
SELF-CLEAN CYCLE PAUSES
Self-clean icon is flashing.
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill Clean solution tank and press Power button to
resume Self-clean cycle.
Self-clean icon is flashing.
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty Dirty water tank and press the Power button to
resume Self-clean cycle
UNIT IS IN USE;
CLEANING FUNCTIONS TURN OFF
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill clean solution tank, press Power button to resume
cleaning
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty dirty water tank. Press Power button, resume
cleaning. *If this is a false error, remove the solids separator and clean completely.
Allow part to dry for 24 hours or dry manually.
Red water droplet icon is flashing.
Red freshen mode icon is flashing.
Flashing
Brushroll cover has been removed. Attach brushroll cover. Press Power button to
resume cleaning.
Red water droplet icon is flashing.
Red freshen mode icon is flashing.
Flashing out of sync
Brushroll is jammed. Remove brushroll cover and brushroll. Remove any object that
may be causing the brushroll to jam. Press Power button resume cleaning.
sharkclean.co.uksharkclean.co.uk
LED GLOSSARY LED GLOSSARY
SCENARIO
VISUAL DETAILS
UNIT IS IN USE
Single battery icon is on.
Solid. Battery low. Note - you will not be able to run a self-clean cycle.
Self-clean icon is pulsing.
Pulsing
Place unit on dock while self-clean icon is pulsing. Press the power button to run
self-clean cycle.
Single battery icon is pulsing.
Pulsing
Battery is close to running out.
Self-clean icon has turned o.
O
Insucient battery life to run self-clean cycle after use.
UNIT IS IN PLACED ON THE DOCK
Battery icons are pulsing.
Pulsing
Unit is charging.
Self-clean icon is on.
On
There is sucient battery life to run a self-clean cycle.
Press the power button to run a self-clean cycle.
Self-clean icon is o.
O
There is not sucient battery life to run self-clean cycle.
Wait until self-clean icon turns on to run a self-clean cycle.
Power button is pressed to activate self-
clean cycle. Battery Icons and Self-clean
icon flash three times.
Flash ×3
Unit is charging. There is not sucient battery life to run a self-clean cycle.
Wait until self-clean icon turns on to run a self-clean cycle.
Power button is pressed to activate self-
clean cycle. Self-clean icon is pulsing.
Pulsing
Self-clean cycle is running. Self-clean icon will turn o when cycle is complete.
Battery icons will turn on and unit will begin charging.
Self-clean cycle IS IN PROCESS; self-
clean cycle PAUSES
Self-clean icon is flashing
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill clean solution tank and press the power button to
resume self-clean cycle.
Self-clean icon is flashing
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty dirty water tank and press the power button to
resume self-clean cycle.
UNIT IS IN USE;
CLEANING FUNCTIONS TURN OFF
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill clean solution tank, press the power button to
resume cleaning.
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty dirty water tank. Press the power button, resume
cleaning. *If this is a false error, remove the solids separator and clean completely.
Allow part to dry for 24 hours or dry manually.
Red water droplet icon is flashing.
Red Freshen Mode icon is flashing.
Flashing
Brushroll cover has been removed. Attach brushroll cover. Press the power button to
resume cleaning.
Red water droplet icon is flashing.
Red Freshen Mode icon is flashing.
Flashing out of sync
Brushroll is jammed. Remove brushroll cover and brushroll. Remove any object that
may be causing the brushroll to jam. Press the power button resume cleaning.
SCENARIO VISUAL
DETAILS
UNIT IS IN USE
Single battery icon is on. Solid.
Battery low. Note - you will not be able to run a Self-clean cycle.
Self-clean icon is pulsing.
Pulsing
Place unit on dock while Self-clean icon is pulsing. Press Power button to run Self-
clean cycle.
Single battery icon is pulsing.
Pulsing
Battery is close to running out.
Self-clean icon has turned o.
O
Insucient battery life needed to run Self-Clean Cycle after use.
UNIT IS PLACED ON THE DOCK
Battery icons are pulsing.
Pulsing
Unit is charging
Self-clean icon is on.
On
There is sucient battery life to run a Self-clean cycle
Press Power button to run a Self-clean cycle
Self-clean icon is o.
O
There is not sucient battery life to run Self-clean cycle
Wait until Self-clean turns on to run a Self-clean cycle
Power button is pressed to activate self-
clean cycle. Battery icons and self-clean
icon flash three times.
Flash ×3
Unit is charging. There is not sucient battery life to run a Self-clean cycle
Wait until Self-clean icon turns on to run a Self-clean cycle
Power button is pressed to activate self-
clean cycle. Self-clean icon is pulsing.
Pulsing
Self-clean cycle is running. Self-clean icon will turn o when cycle is complete.
Battery icons will turn on and unit will begin charging
SELF-CLEAN CYCLE IS IN PROCESS;
SELF-CLEAN CYCLE PAUSES
Self-clean icon is flashing.
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill Clean solution tank and press Power button to
resume Self-clean cycle.
Self-clean icon is flashing.
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty Dirty water tank and press the Power button to
resume Self-clean cycle
UNIT IS IN USE;
CLEANING FUNCTIONS TURN OFF
Blue water droplet icon is flashing.
Flashing
Clean solution tank is empty. Fill clean solution tank, press Power button to resume
cleaning
Red water droplet icon is flashing.
Flashing
Dirty water tank is full. Empty dirty water tank. Press Power button, resume
cleaning. *If this is a false error, remove the solids separator and clean completely.
Allow part to dry for 24 hours or dry manually.
Red water droplet icon is flashing.
Red freshen mode icon is flashing.
Flashing
Brushroll cover has been removed. Attach brushroll cover. Press Power button to
resume cleaning.
Red water droplet icon is flashing.
Red freshen mode icon is flashing.
Flashing out of sync
Brushroll is jammed. Remove brushroll cover and brushroll. Remove any object that
may be causing the brushroll to jam. Press Power button resume cleaning.
sharkclean.co.uksharkclean.co.uk
When a consumer buys a product in the UK, they get the benefit of legal rights relating to the quality of the
product (your “statutory rights”). You can enforce these rights against your retailer. However, at Shark® we are so
confident about the quality of our products that we give the original product owner an additional manufacturer’s
guarantee of up to three years (1 year standard plus 2 on registration). These terms and conditions relate to our
manufacturer’s guarantee only - your statutory rights are unaected.
The conditions below describe the prerequisites and scope of our guarantee. They do not aect your statutory
rights or the obligations of your retailer and your contract with them.
The Lithium ION power pack is not covered by the 3 year guarantee (see battery guarantee on next page)
Shark® Guarantees
A household appliance like a vacuum cleaner constitutes a sizeable investment. Your new machine needs to work
properly for as long as possible. The guarantee it comes with is an important consideration - and reflects how much
confidence the manufacturer has in its product and manufacturing quality.
Every Shark® machine comes with a free parts and labour guarantee. Our customer service helpline (0800 862
0453) is open from 9.00am to 6.00pm Monday - Friday. It’s free to call, and you’ll be put straight through to a
Shark® representative. You’ll also find online support at www.sharkclean.co.uk
How do I register my extended Shark® guarantee?
You can register your guarantee online within 28 days of purchase. To save time, you’ll need the following
information about your machine:
• Date you purchased the machine (receipt or delivery note)
To register online, please visit www.sharkclean.co.uk/register-guarantee. Products purchased directly from Shark®
are automatically registered.
IMPORTANT
• Both the 1 years and the extended 2 years guarantee will only cover your product from the date of purchase.
• Please keep your receipt at all times. Should you need to extend your guarantee we will need your receipt to
verify the information you have supplied to us is correct. The inability to produce a valid receipt may invalidate the
extension.
What are the benefits of registering my free Shark® guarantee?
When you register your guarantee we’ll have your details to hand if we ever need to get in touch. If you further
agree to receive communications from us, you can also receive tips and advice on how to get the best out of your
Shark® vacuum and hear the latest news about new Shark® technology and launches.
If you register your guarantee online, you’ll get instant confirmation that we’ve received your details.
How long are new Shark® machines guaranteed for?
Our confidence in our design and quality control means that your new Shark® vacuum cleaner is guaranteed for a
total of up to three years (1 years plus 2 years on registration).
What is covered by the free Shark® guarantee?
Repair or replacement (at Shark’s discretion) of your Shark® machine, including all parts and labour. A Shark®
guarantee is in addition to your legal rights as a consumer.
What is not covered by the free Shark® guarantee?
1. Blockages - for details of how to unblock your 3-in-1 vacuum cleaner, please refer to the instructions.
2. Normal wear and tear such as brush bar, fuse, belt, batteries, hose etc.
3. Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of
the vacuum cleaner which is not in accordance with the Shark® instructions supplied with your machine.
4. Use of the vacuum cleaner for anything other than normal domestic household purposes.
5. Use of parts not assembled or installed in accordance with the operating instructions.
6. Use of parts and accessories which are not Shark® Genuine Components.
7. Faulty installation (except where installed by Shark®).
8. Repairs or alterations carried out by parties other than Shark® or its agents.
9. The Lithium ION power pack battery. Please see next page for battery guarantee.
What happens when my guarantee runs out?
Shark® does not design products to last for a limited time. We do appreciate that there may be a desire for our
customers to want to repair their vacuum cleaners after the guarantee has lapsed. In this case please contact our
Freephone customer service help line and ask about our out of guarantee programme, on 0800 862 0453.
Where can I buy genuine Shark® spares and accessories?
Shark® spares and accessories are developed by the same engineers who developed your Shark® vacuum.
You’ll find a full range of Shark® spares, replacement parts and accessories for all Shark® machines at
www.sharkclean.co.uk.
Please remember that damage caused by use of non-Shark® spares is not covered under your guarantee.
THREE (3) YEAR LIMITED GUARANTEE
When a consumer buys a product in the UK, they get the benefit of legal rights relating to the quality of the
product (your “statutory rights”). You can enforce these rights against your retailer. However, at Shark® we are so
confident about the quality of our products that we give you an additional manufacturer’s guarantee of up to two
years for the battery (1 year as standard plus 1 year when you register). These terms and conditions relate to our
manufacturer’s guarantee only - your statutory rights are unaected.
Every Shark® machine comes with a free parts and labour guarantee. Our customer service helpline
(0800 862 0453) is open from 9.00am to 6.00pm Monday - Friday. It’s free to call, and you’ll be put straight
through to a Shark® representative.
You’ll also find online support at www.sharkclean.co.uk
IMPORTANT
• The manufacturer’s guarantee covers your battery for 2 years starting on the date of purchase.
• Please keep your receipt at all times. Should you need to use your guarantee we will need your receipt to verify
the information you have supplied to us is correct. The inability to produce a valid receipt may invalidate your
guarantee.
How long are new Shark® batteries guaranteed for?
Our confidence in our design and quality control means that your new Shark® vacuum cleaner battery is
guaranteed for a total of one year as standard, one year on registration.
What is covered by the free Shark® guarantee?
Repair or replacement of your Shark® battery (at Shark’s discretion to decide whether to replace or repair)
including all parts and labour. A Shark® guarantee is in addition to your legal rights as a consumer.
What is not covered by the free Shark® guarantee?
1.
Normal wear and tear of parts which require regular maintenance and/or replacement to ensure the proper
functioning of your unit.
2.
Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of
the vacuum cleaner which is not in accordance with the Shark® Instructions supplied with your machine.
3.
Use of the battery for anything other than powering the 3-in-1 cleaner.
4.
Use of parts not assembled or installed in accordance with the instructions.
5.
Use of parts and accessories which are not Shark® spares.
6.
Faulty installation (except where installed by Shark®).
Where can I buy genuine Shark® spares and accessories?
Shark® spares and accessories are developed by the same engineers who developed your Shark® vacuum.
You’ll find a full range of Shark® spares, replacement parts and accessories for all Shark® machines at
www.sharkclean.co.uk.
Please remember that damage caused by use of non-Shark® spares is not covered under your guarantee.
TWO (2) YEAR LIMITED BATTERY GUARANTEE
sharkclean.co.uksharkclean.co.uk
When a consumer buys a product in the UK, they get the benefit of legal rights relating to the quality of the
product (your “statutory rights”). You can enforce these rights against your retailer. However, at Shark® we are so
confident about the quality of our products that we give the original product owner an additional manufacturer’s
guarantee of up to three years (1 year standard plus 2 on registration). These terms and conditions relate to our
manufacturer’s guarantee only - your statutory rights are unaected.
The conditions below describe the prerequisites and scope of our guarantee. They do not aect your statutory
rights or the obligations of your retailer and your contract with them.
The Lithium ION power pack is not covered by the 3 year guarantee (see battery guarantee on next page)
Shark® Guarantees
A household appliance like a vacuum cleaner constitutes a sizeable investment. Your new machine needs to work
properly for as long as possible. The guarantee it comes with is an important consideration - and reflects how much
confidence the manufacturer has in its product and manufacturing quality.
Every Shark® machine comes with a free parts and labour guarantee. Our customer service helpline (0800 862
0453) is open from 9.00am to 6.00pm Monday - Friday. It’s free to call, and you’ll be put straight through to a
Shark® representative. You’ll also find online support at www.sharkclean.co.uk
How do I register my extended Shark® guarantee?
You can register your guarantee online within 28 days of purchase. To save time, you’ll need the following
information about your machine:
• Date you purchased the machine (receipt or delivery note)
To register online, please visit www.sharkclean.co.uk/register-guarantee. Products purchased directly from Shark®
are automatically registered.
IMPORTANT
• Both the 1 years and the extended 2 years guarantee will only cover your product from the date of purchase.
• Please keep your receipt at all times. Should you need to extend your guarantee we will need your receipt to
verify the information you have supplied to us is correct. The inability to produce a valid receipt may invalidate the
extension.
What are the benefits of registering my free Shark® guarantee?
When you register your guarantee we’ll have your details to hand if we ever need to get in touch. If you further
agree to receive communications from us, you can also receive tips and advice on how to get the best out of your
Shark® vacuum and hear the latest news about new Shark® technology and launches.
If you register your guarantee online, you’ll get instant confirmation that we’ve received your details.
How long are new Shark® machines guaranteed for?
Our confidence in our design and quality control means that your new Shark® vacuum cleaner is guaranteed for a
total of up to three years (1 years plus 2 years on registration).
What is covered by the free Shark® guarantee?
Repair or replacement (at Shark’s discretion) of your Shark® machine, including all parts and labour. A Shark®
guarantee is in addition to your legal rights as a consumer.
What is not covered by the free Shark® guarantee?
1. Blockages - for details of how to unblock your 3-in-1 vacuum cleaner, please refer to the instructions.
2. Normal wear and tear such as brush bar, fuse, belt, batteries, hose etc.
3. Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of
the vacuum cleaner which is not in accordance with the Shark® instructions supplied with your machine.
4. Use of the vacuum cleaner for anything other than normal domestic household purposes.
5. Use of parts not assembled or installed in accordance with the operating instructions.
6. Use of parts and accessories which are not Shark® Genuine Components.
7. Faulty installation (except where installed by Shark®).
8. Repairs or alterations carried out by parties other than Shark® or its agents.
9. The Lithium ION power pack battery. Please see next page for battery guarantee.
What happens when my guarantee runs out?
Shark® does not design products to last for a limited time. We do appreciate that there may be a desire for our
customers to want to repair their vacuum cleaners after the guarantee has lapsed. In this case please contact our
Freephone customer service help line and ask about our out of guarantee programme, on 0800 862 0453.
Where can I buy genuine Shark® spares and accessories?
Shark® spares and accessories are developed by the same engineers who developed your Shark® vacuum.
You’ll find a full range of Shark® spares, replacement parts and accessories for all Shark® machines at
www.sharkclean.co.uk.
Please remember that damage caused by use of non-Shark® spares is not covered under your guarantee.
THREE (3) YEAR LIMITED GUARANTEE
When a consumer buys a product in the UK, they get the benefit of legal rights relating to the quality of the
product (your “statutory rights”). You can enforce these rights against your retailer. However, at Shark® we are so
confident about the quality of our products that we give you an additional manufacturer’s guarantee of up to two
years for the battery (1 year as standard plus 1 year when you register). These terms and conditions relate to our
manufacturer’s guarantee only - your statutory rights are unaected.
Every Shark® machine comes with a free parts and labour guarantee. Our customer service helpline
(0800 862 0453) is open from 9.00am to 6.00pm Monday - Friday. It’s free to call, and you’ll be put straight
through to a Shark® representative.
You’ll also find online support at www.sharkclean.co.uk
IMPORTANT
• The manufacturer’s guarantee covers your battery for 2 years starting on the date of purchase.
• Please keep your receipt at all times. Should you need to use your guarantee we will need your receipt to verify
the information you have supplied to us is correct. The inability to produce a valid receipt may invalidate your
guarantee.
How long are new Shark® batteries guaranteed for?
Our confidence in our design and quality control means that your new Shark® vacuum cleaner battery is
guaranteed for a total of one year as standard, one year on registration.
What is covered by the free Shark® guarantee?
Repair or replacement of your Shark® battery (at Shark’s discretion to decide whether to replace or repair)
including all parts and labour. A Shark® guarantee is in addition to your legal rights as a consumer.
What is not covered by the free Shark® guarantee?
1.
Normal wear and tear of parts which require regular maintenance and/or replacement to ensure the proper
functioning of your unit.
2.
Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of
the vacuum cleaner which is not in accordance with the Shark® Instructions supplied with your machine.
3.
Use of the battery for anything other than powering the 3-in-1 cleaner.
4.
Use of parts not assembled or installed in accordance with the instructions.
5.
Use of parts and accessories which are not Shark® spares.
6.
Faulty installation (except where installed by Shark®).
Where can I buy genuine Shark® spares and accessories?
Shark® spares and accessories are developed by the same engineers who developed your Shark® vacuum.
You’ll find a full range of Shark® spares, replacement parts and accessories for all Shark® machines at
www.sharkclean.co.uk.
Please remember that damage caused by use of non-Shark® spares is not covered under your guarantee.
TWO (2) YEAR LIMITED BATTERY GUARANTEE
sharkclean.co.uksharkclean.co.uk
NOTES NOTES
sharkclean.co.uksharkclean.co.uk
NOTES NOTES
sharkclean.co.uksharkclean.co.uk
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
This Instruction Booklet is designed to help you get a complete understanding of your new Shark HydroVac™
Cordless 3-in-1 Cleaner.
SharkNinja Europe Limited,
3150 Century Way, Thorpe Park,
Leeds, LS15 8ZB, UK
+44 (0)800 862 0453
www.sharkclean.co.uk
SharkNinja Germany GmbH
Rotfeder Ring 9
60327 Frankfurt am Main
Germany
www.sharkclean.eu
Illustrations may dier from actual product. We are constantly striving to improve our products, therefore the specifications
contained herein are subject to change withoutnotice.
SHARK and SHARK HYDROVAC are registered trademarks of SharkNinja Operating LLC.
© 2022 SharkNinja Operating LLC.
WD200UKSeries_IB_MP_230405_Mv1
PRINTED IN CHINA
@sharkcleaninguk
@sharkcleanuk
@sharkcleanuk
TECHNICAL SPECIFICATIONS
Voltage: 21.6V
TIP: You can find the model on the QR code label on
the bottom of the back of the 3-in-1 Cleaner.
All testing on carpet (e.g. per ASTM-F608) shall be
conducted in Freshen Mode.
RECORD THIS INFORMATION
Model Number: �����������������������������
Date Code: ���������������������������������
Date of Purchase: ���������������������������
(Keep receipt)
Store of Purchase: ���������������������������
REGISTER YOUR PURCHASE
registeryourshark.com
