Loading ...
Loading ...
Loading ...
USING YOUR 3-IN-1 CLEANER
Press the release button and lift o the Clean Solution Tank.
NOTE: When docked properly, the charging lights on the Main Body will blink, indicating that charging has begun. When
charging is complete, all three indicator lights will turn o.
NOTE: The main unit comes with a partial charge. For maximum runtime, charge fully before first use (approximately 4
hours). Leaving the unit plugged in will not damage battery life.
NOTE: Only use Shark HydroVac Multi-Surface Cleaning Solution and water with this product.
NOTE: Be sure to not overfill the Clean Solution Tank with more HydroVac Multi Surface Concentrate than instructed, as this
may clause streaking
NOTE: Without sucient water supply in the clean solution tank, HydroVac will not run.
USING YOUR 3-IN-1 CLEANER
CHARGING ON THE DOCK
CORD WRAP
STORAGE AND
CHARGING DOCK
DOCK CHARGING
Charge the unit by placing it on the Storage and Charging Dock. Make sure the contacts on the body are
aligned with the contacts on the charging dock.
The Battery Icon on the main body will illuminate when charging begins.
When charging is complete and you need to use the unit again, lift it o the dock.
FILLING THE CLEAN SOLUTION TANK
REMOVE THE CLEAN SOLUTION TANK
1
FILL THE CLEAN SOLUTION TANK
Unscrew the cap and add water to the tank, up to the WATER line. Next, add Shark HydroVac™ Multi-Surface
Cleaning Solution, filling to the SOLUTION line. Replace the cap and reinsert the tank until it clicks into place.
The top of the tank should be flush with the top of the body.
2
sharkclean.co.uksharkclean.co.uk
Loading ...
Loading ...
Loading ...