POLYCOOL FODBLNPLYAV02 1000W 2in1 Vacuum Blender, 700ml User Manual

User Manual

[Revision 2.0 December 2023]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY

VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance,

assembly, inclusions, specifications, description, and packaging.

PL-V02 Vacuum Blender

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

•

Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

•

Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

•

Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

•

Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

•

The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

General Electrical Safety

•

Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

•

Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

•

The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Vacuum Blender Safety

PLEASE READ THIS MANUAL THOROUGHLY BEFORE USING AND SAVE IT FOR FUTURE REFERENCE.

W

ARNINGS

• Please read this manual thoroughly before using and save it for future reference.

• Children aged from 3 years and less than 8 years shall only switch ON/OFF the appliance if it has been placed or installed in its intended normal

operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards

involved. Children aged from 3 years and less than 8 years shall not plug in, regulate, and clean the appliance or perform user maintenance.

• Children must be supervised not to play with this appliance.

• This device should never operate empty/unloaded, because such action could result in appliance failure and/or injuries to the user.

• Plug in power supply that corresponds to the rated one on product/charger only. In case of misusage power or device failure may occur.

• This device is equipped with a grounded plug. Please ensure the wall outlet in your house is well earthed.

• This device is intended for household, indoor and dry use only.

• Before use, place the product on hard, flat, stable, and dry surface.

• Slight odors are possible at beginning of usage until device reaches its thermal stability.

• If the device is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors or dropped into water, do not use

it.

• Do not attempt any modification or repair by yourself and ensure that any repair is conducted only by appropriately qualified technician.

• If the supply cord is damaged, it must be replaced immediately by authorized and qualified person only.

• Use extreme caution when manipulating the parts to avoid any injuries due to the sharp blades.

• This device should never be switched on or stay plugged in power supply when not in use, while replacing accessories or during cleaning.

• Only use attachments that are recommended or sold by the distributor.

• When cleaning, do not submerge the main unit or heating jug in any liquid. They are NOT dishwasher safe.

• To reduce the risk of electrical shock, do not put cord, plug, or appliance, in or near water or other liquids.

• Do not place the appliance on or near a hot gas plate, hot electric burner, or in a heated oven.

• Do not pour hot liquid into cup or jug. The max temperature should not exceed 40°C.

• Do not overfill the cups or heating jug over the MAX line.

• Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.

• Never leave weak or empty batteries in the device – especially if you suspect it will not be used for several months. Use the correct size and type

of battery specified by the manufacturer and installed in accordance with polarity (+ and – terminals) marked on the device. Do not mix old and

new batteries, batteries of different brands, or batteries of different types (alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium)) in

the same device as this may cause the batteries to leak. Rechargeable batteries must be removed before being recharged. Do not recharge non-

rechargeable batteries. Battery replacement and/or recharging should be done only by adults. Always keep all batteries in a safe place away from

children and pets. Store new batteries, in their original packaging, in a dry place and at normal room temperature until ready to use and dispose

of used batteries in accordance with your local law. Do not store device with batteries in very warm places as this could result in reduced battery

performance and/or battery leakage. Battery acid and leakage can cause personal injury and/or damage to the product and/or surrounding

property. If battery leakage occurs, thoroughly wash any affected skin, making sure to keep battery acid away from eyes, ears, nose, and mouth.

Immediately wash any clothing or other surface that came into contact with leaked battery acid.

• Close supervision is necessary when used near children.

• Wash and dry thoroughly before first use.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

• Do not touch sharp blades when appliance is plugged in. If the blades get stuck, unplug the appliance before you remove the ingredients. Be

careful when handling the blades, emptying the cup or jug and during cleaning.

• The appliance is only to be used with types that are marked on the appliance.

• The use of attachments or accessories not recommended or sold by the product distributor may cause personal or property hazards or injuries.

• Although the product has been checked its usage and consequences are strictly user responsibility.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

Table of Contents

Safety ............................................................................................................................................................. 2

Safety Symbols ........................................................................................................................................................... 5

Parts Identification ....................................................................................................................................... 8

Operation ....................................................................................................................................................... 9

Before First Use .......................................................................................................................................................... 9

How to Use the Functions .......................................................................................................................................... 9

Modes ....................................................................................................................................................................... 11

Mode 0 ............................................................................................................................................................... 11

Mode V: Vacuuming ........................................................................................................................................... 12

Mode VB: Vacuuming and Blending .................................................................................................................. 16

Mode B: Blending ............................................................................................................................................... 20

Pulsing ................................................................................................................................................................ 22

Tips and Recommendations ..................................................................................................................................... 23

Cleaning and Maintenance ........................................................................................................................ 24

General Maintenance ............................................................................................................................................... 24

Suitable Cleaning Methods for Parts ........................................................................................................................ 25

Troubleshooting ......................................................................................................................................... 26

Specifications ............................................................................................................................................. 26

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

Parts Identification

No. Name No. Name

1 Main unit 10 Valve protective cap

2 Control panel 11 Vacuum unit

3

Mode / start-stop knob

12

Battery compartment cover

4

Pulse button

13

Vacuuming ON / OFF button

5

Vacuuming connector cover

14

Vacuuming head

6

700 ml cup

15

Vacuuming nozzle

7

6 wing blade assembly

16

Cable

8 Silicone valve (2 pcs) 17 Cable storage

9 Valve holder

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

Operation

Before First Use

Before you use the appliance and accessories for the first time, thoroughly clean the parts that come into contact

with food. You can follow the cleaning procedure under the Cleaning and Maintenance s

ection.

How to Use the Functions

NOTE: Stop and unplug the appliance if there is a strong smell of smoke coming from device. Let it cool down

for 15 minutes before further use.

•

Do not add heavy ingredients such as bread dough or mashed potatoes – to avoid overloading the device.

•

To minimize overloading chance the device you can add more liquid ingredients or process several small

batches of food.

•

The content should NEVER exceed max level marked on the cup. The exceeding can cause device

overheating.

•

The content temperature at the beginning of the process should NEVER exceed 40 °C.

•

Powdered ingredients (powdered sugar, cocoa, protein powder) should be blended briefly with liquid in a

separated container before using.

•

Use only accessories intended for selected mode.

•

OVERHEATING PROTECTION: The device has safety protection system. When the device runs

continuously for over 230 s, it will stop automatically. If you have not finished processing, set the device to “0

mode” and let it cool down for 10 minutes. After that set the mode knob to same mode and continue to use.

•

Pre-cut food to pieces approximately 2 x 2 x 2 cm.

•

Always crush the ice with small amount of water.

•

Make sure to place and seal the silicone valve correctly – refer to the vacuum valve assembly/disassembly

instructions (see image below). Incorrect assembly can lead to poor or no vacuuming performance.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

•

If the food sticks to the wall of the cup, switch off the device and unplug it. Then use soft spatula (not

supplied with the product) to remove the food from the wall.

•

If bubbles/foam expands beyond the MAX level indication, stop the vacuum operation immediately.

•

Never vacuum or blend carbonated beverages. Build up pressure from released gasses can cause container

to burst, resulting in possible injury.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

Modes

B: Blending

0: Mode 0

VB: Vacuum blending

V: Vacuum

P: Pulse

ON/OFF symbol: START/STOP

First check and get familiar with control panel, pulse button, mode knob and its modes.

Mode 0

Before use and when operation is finished, always turn the knob to “0” position.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

Mode V: Vacuuming

Usage with 700ml Cup and 6 Wing Blade Assembly

1. Assemble the vacuum valve set (holder + valve + valve protector) to the cup by rotating it clockwise until

cup’s indicator points on the doted locked field marked on the valve holder.

2. Fill in the ingredients up to the MAX level marked on the cup.

NOTE: The content should never exceed the MAX level.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

3. Assemble the blade assembly to the cup by rotating it clockwise until cup’s indicator points on the dotted

locked field marked on the blade assembly.

4. Place the cup onto the main unit and rotate it clockwise until you hear a click sound.

5. Insert the vacuuming device into the main body (remove cover before that, if needed), flip it to 90°, attach the

vacuuming nozzle onto the valve and press the head down slightly.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

6. Rotate the knob to mode V - you will hear the beep sound when in position and the mode light will start to

flash. Press the knob to start the V cycle, you will hear the beep sound and the mode light will turn on.

After the cycle is completed, the device will stop and switch to standby mode automatically. The mode light

will start to flash again.

7. Device vacuums until maximum vacuum is reached.

8. Lift the vacuuming head and disassemble the cup from the main device.

9. Store the vacuumed cup and content or release the vacuum by gently pulling the silicone valve flap – lifting it

just enough to hear air being sucked in.

NOTE: You do not need to remove valve to release the vacuum.

10. Always release the vacuum first before opening the 700 ml cup.

11. It is advised to reposition the valve right away after releasing air.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

12. It is important that the vacuum valve holder is washed well and dried thoroughly after every use to remove

possible food residues. Only this way the vacuuming performance is optimal.

Usage with Bags or Vacuum Bottle Stopper

•

Vacuum Storage Bags: Put in the ingredients and make sure that it is sealed well. Place the vacuuming

nozzle over the valve and hold flat it firmly. Use the mode V according to the instructions above. To release

the vacuum, unzip the bag.

•

Bottle Stopper: Insert the bottle stopper into the bottle neck. Place the vacuuming nozzle over the valve and

hold it flat against firmly. Use the mode V according to the instructions above.

The vacuuming device can be used independently (without the main unit) as well. Insert 4x 1,5 V AA batteries in

the battery compartment according to instructions in battery compartment.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

Press the vacuuming device nozzle onto the vacuum valve directly (if fits to the size) and vacuum by pressing

the vacuuming button until it stops automatically indicating that maximum vacuum has been reached.

Mode VB: Vacuuming and Blending

Usage with 700ml Cup and 6 Wing Blade Assembly

1. Assemble the vacuum valve set (holder + valve + valve protector) to the cup by rotating it clockwise until

cup’s indicator points on the doted locked field marked on the valve holder.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

2. Fill in the ingredients up to the MAX level marked on the cup.

NOTE: The content should never exceed the MAX level.

3. Assemble the blade assembly to the cup by rotating it clockwise until cup’s indicator points on the doted

locked field marked on the blade assembly.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

4. Place the cup onto the main unit and rotate it clockwise until you hear a click sound.

5. Insert the vacuuming device into the main body, flip it to 90°, attach the vacuuming head onto the valve and

press it down slightly.

6. Rotate the knob to mode VB - you will hear the beep sound when in position and the mode light will start to

flash. Press the knob to start the VB cycle, you will hear the beep sound and the mode light will turn on. After

the cycle is completed, the device will stop and switch to standby mode automatically. The mode light will

start to flash again.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

7. VB cycle: vacuuming + 3 x pulsing + 30 s blending

8. Lift the vacuuming head and disassemble the cup from the main device.

9. Store the vacuumed cup and content or release the vacuum by gently pulling the silicone valve flap – lifting it

just enough to hear air being sucked in.

NOTE: You do not need to remove valve to release the vacuum.

10. Always release the vacuum first before opening the 700ml cup.

11. It is advised to reposition the valve right away after releasing air.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

12. it is important that the vacuum valve holder is washed well and dried thoroughly after every use to remove

possible food residues. Only this way the vacuuming performance is optimal.

Mode B: Blending

Use with 700ml Cup / 6 Wing Blade Assembly

1. Assemble the vacuum valve set (holder + valve + valve protector) to the cup by rotating it clockwise until

cup’s indicator points on the doted locked field marked on the valve holder.

2. Fill in the ingredients up to the MAX level marked on the cup (see: Pictures, pic. 6).

NOTE: The content should never exceed the MAX level.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

3. Assemble the blade assembly to the cup by rotating it clockwise until cup’s indicator points on the doted

locked field marked on the blade assembly.

4. Place the cup onto the main unit and rotate it clockwise until you hear a click sound.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

5. Rotate the knob to mode B - you will hear the beep sound when in position and the mode light will start to

flash. Press the knob to start the B cycle, you will hear the beep sound and the mode light will turn on (see:

Pictures, pic. 14).

After the cycle is completed, the device will stop and switch to standby mode automatically. The mode light

will start to flash again.

− Blending cycle: 3 x pulsing + 30 s blending

− Disassemble the cup from the main unit by turning it anti-clockwise before lifting it.

Pulsing

Use with 700ml Cup / 6 Wing Blade Assembly

NOTE: Individual function pulsing can only be used in B mode.

Use the pulse “P” for short bursts or when the food gets stuck in the cup.

The pulse will operate for as long as the button is pressed. Use pulse function continuously for maximum 5

seconds.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

IMPORTANT NOTE – OVERHEATING PROTECTION: To maintain the device at its best performance and to

prolong the motor life, the total operating time of the unit is 230s, which for example is 6 cycles in B mode. After

the max. operating time is reached, the device will turn off automatically to cool down for 10 min, before it can be

used again.

Tips and Recommendations

•

Due to the high friction created in the cup by the blades, the content temperature could raise slightly. To

prevent this, an ice cube or two can be added to maintain the temperature.

•

If the food sticks to the wall of the cup, switch off the appliance and unplug it. Then use a soft spatula (not

supplied with the product) to remove the food from the wall.

•

If ingredients get stuck, remove them from the base, shake or tap it slightly and continue with the process.

Food separation in the fridge: If you store your vacuumed food in a fridge, you might notice that the food gets

separated in a short period of time. The reason for that is that warmer air shrinks and consequently

pressure/vacuum increases. In a vacuumed environment, the air is taken from the solid content in a cup, which

is then lifted, and the empty space is then filled with liquid which is heavier than the solid content.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

Cleaning and Maintenance

General Maintenance

•

Before you clean the device, unplug it.

•

The blades are sharp. Be careful when you clean blade units.

•

Make sure that the cutting edges of the blades do not come into contact with hard objects. This may cause

the cutting edges to become blunt.

•

Clean the motor unit with a damp cloth and dry thoroughly.

•

Clean other parts in lukewarm water with some cleaning agent or in a dishwasher. Refer to the cleaning

table.

•

If ingredients dry inside the blending vessels, fill the cups about 2/3 with warm, soapy water. Assemble

according to the instructions and blend the content for 20-30 seconds. Scrub gently and rinse.

•

Clean the 6-wing blade assembly rubber gasket regularly. Grab and lift the gasket from the base and wash

under warm water.

•

Before storing the device, you can wind the cable in cable storage at the bottom of the device.

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

Suitable Cleaning Methods for Parts

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

PL-V02 Vacuum Blender

Troubleshooting

Issue Possible solution

The device does not work.

Check if the plug is properly inserted into the power supply

socket.

Check if all the removable parts are properly assembled.

Smoke comes out of the air vent.

Stop and unplug the appliance immediately. Leave to cool

down for 15 minutes before further use.

The device stopped working during the cycle.

Total continuous operation time 230 seconds could be

exceeded. Set to mode 0, unplug it and leave to cool down

for 10 minutes.

Specifications

Power 1000W

Input Voltage 220-240V

Capacity 700ml

Power Plug Australian Standard

POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL POLYCOOL

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

POLYCOOL FODBLNPLYAV02 1000W 2in1 Vacuum Blender, 700ml Capacity, Removable Sealing Arm

Product's Documents

Product manual

Specifications

POLYCOOL FODBLNPLYAV02 Questions and Answers