Hikvision DS-7104NI-Q1/M User Manual

Loading ...

Note

This funcon is only available for certain models.

4) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of

the detecon region.

6. Set the arming schedule. Refer to Congure Arming Schedule for details.

7. Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.

8. Click Apply.

Region Entrance Detecon

Region entrance detecon funcon detects people, vehicles or other objects which enter a pre-

dened virtual region from the outside place, and some certain acons can be taken when the

alarm is triggered.

Steps

1. Go to Conguraon → Event → Smart Event → Region Entrance .

2. Set Camera.

3. Turn on Enable.

4. Oponal: Check Save VCA Picture to save the captured pictures of VCA detecon.

5. Set the detecon rules and detecon areas.

1) Set Arming Area. Up to 4 arming areas are selectable.

2) Adjust Sensivity. Sensivity: Range [0-100]. The higher the value is, the more easily the

detecon alarm can be triggered.

3) Oponal: Set Target Detecon as Human or Vehicle to discard alarms which are not triggered

by human body or vehicle.

Note

This funcon is only available for certain models.

4) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of

the detecon region.

6. Set the arming schedule. Refer to Congure Arming Schedule for details.

7. Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.

8. Click Apply.

Region Exing Detecon

Region exing detecon funcon detects people, vehicles or other objects which exit from a pre-

dened virtual region, and some certain acons can be taken when the alarm is triggered.

Steps

1. Go to Conguraon → Event → Smart Event → Region Exing .

2. Set Camera.

3. Turn on Enable.

Network Video Recorder User Manual

Loading ...

Hikvision DS-7104NI-Q1/M 4-ch Mini 1U NVR