Hikvision DS-7104NI-Q1/M User Manual

Loading ...

3. Select a DDNS type.

4. Enter parameters including service address, domain name, etc.

5. Click Apply.

What to do next

You can view DDNS status in Status.

6.2.3 NAT

Two ways are provided for port mapping to realize the remote access via the cross-segment

network, UPnP™ and manual mapping.

Before You Start

Enable the UPnP™ funcon of your router if UPnP™ is required. When the device network working

mode is mul-address, the default device route should be on the same network segment as the

LAN IP address of the router.

Steps

1. Go to Conguraon → Network → General → NAT .

Figure 6-6 NAT

2. Turn on Enable.

3. Select Mapping Type as Manual or Auto

Auto The port mapping items are read-only, and the external ports are set by the router

automacally. You can click Refresh to get the latest status of the port mapping.

Manual Select an external port type. Click

to edit External Port. You can use the default

external port No., or change it according to actual requirements. External Port

indicates the port No. for port mapping in the router.

The value of the RTSP port No. should be 554 or between 1024 and 65535, while

the value of the other ports should be between 1 and 65535 and the value must be

dierent from each other. If mulple devices are congured for the UPnP™ sengs

under the same router, the value of the port No. for each device should be unique.

4. Set the virtual server of your router, including internal source port, external source port, etc. The

virtual server parameters shall be corresponding with your device port.

Network Video Recorder User Manual

Loading ...

Hikvision DS-7104NI-Q1/M 4-ch Mini 1U NVR