Loading ...
Loading ...
Loading ...
Maintenance
●
If the product does not work properly, please contact your dealer or the nearest service center.
●
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
●
A few device components (e.g., electrolyc capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
Cleaning
●
Please use a
so and dry cloth when clean inside and outside surfaces of the product cover. Do
not use alkaline detergents.
Using Environment
●
When any laser equipment is in use, make sure that the device lens is not exposed to the laser
beam, or it may burn out.
●
DO NOT expose the device to high electromagnec radiaon or dusty environments.
●
For indoor-only device, place it in a dry and
well-venlated environment.
●
DO NOT aim the lens at the sun or any other bright light.
●
Make sure the running environment meets the requirement of the device. The
operang
temperature shall be -30 °C to 60 °C (-22 °F to 140 °F), and the operang humidity shall be 95%
or less (no condensing).
●
DO NOT place the camera in extremely hot, cold, dusty or damp
locaons, and do not expose it
to high
electromagnec radiaon.
Emergency
●
If smoke, odor, or noise arises from the device, immediately turn
o the power, unplug the
power cable, and contact the service center.
Time
Synchronizaon
●
Set up device me manually for the rst me access if the local me is not synchronized with
that of the network. Visit the device via Web browse/client
soware and go to me sengs
interface.
Reecon
●
Make sure that no reecve surface is too close to the device lens. The IR light from the device
may reect back into the lens causing reecon.
2.4 System Requirement
Your computer should meet the requirements for proper vising and operang the product.
Network Camera User Manual
14
Loading ...
Loading ...
Loading ...