Loading ...
Loading ...
Loading ...
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC 25
NOTE: Do not operate your hedge trimmer with dull or damaged cutting blades. This
may cause overload and will give unsatisfactory cutting results.
LUBRICATING THE BLADES (Fig. 8)
For best operation and longer blade life,
lubricate the hedge trimmer blades with
light-weight machine oil before and after
each use.
1. Remove the battery pack from the
hedge trimmer.
2. Lay the hedge trimmer on a flat
surface. Apply some light-weight
machine oil along the edge of the top
blades. If you will be using the hedge trimmer for an extended time, it is advisable to
take a break, remove the battery, and oil the blades.
If the upper blades are aligned completely with the lower ones, start the hedge trimmer
and then stop it to offset the blades before lubrication.
WARNING: Do not oil while the hedge trimmer is running.
WARNING: Blades are sharp. When handling the blade assembly, wear nonslip,
heavy-duty protective gloves. Do not place your hand or fingers between blades or in
any position where they could get pinched or cut. NEVER touch blades or service the
unit with battery pack installed.
TRANSPORTING AND STORING
Always place the blade sheath on the blade before storing or transporting the
hedge trimmer. Use caution to avoid the sharp teeth of the blade.
Clean the hedge trimmer thoroughly before storing.
Store the hedge trimmer indoors, in a dry place that is inaccessible to children.
Keep away from corrosive agents such as garden chemicals and deicing salts.
WARNING: Blades are sharp. When handling the blade assembly, wear non-slip,
heavy-duty protective gloves. Do not place your hand or fingers between blades or in
any position where they could get pinched or cut. NEVER touch blades or service the
unit with battery pack installed.
8
Loading ...
Loading ...
Loading ...