Loading ...
Loading ...
Loading ...
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC22
WARNING: If any parts are missing, damaged or broken, do not operate your
trimmer until they have been replaced. Failure to do so could result in possibly serious
personal injury.
WARNING: To prevent serious personal injury, always use both the front handle
and the rear handle to hold the hedge trimmer during operation.
WARNING: To prevent serious personal injury, keep hands away from blades.
Do not attempt to remove cut material or hold material to be cut when the blades are
moving. Make sure that the blades have completely stopped and the battery pack
is removed before clearing jammed material from blades. Do not grasp the exposed
cutting blades or cutting edges when picking up or holding the unit.
WARNING: Clear the area to be cut before each use. Remove all objects, such
as cords, lights, wire, or string which can become entangled in the cutting blade and
create a risk of serious personal injury.
Before starting the hedge trimmer, maintain proper footing and balance and do not
overreach. Wear safety goggles, non-skid footwear and rubber gloves. Hold the
unit with both hands with the cutting blades directed away from you.
Do not trim too much at once. This can cause the blades to bind and slow down,
reducing the cutting efficiency.
Do not force the hedge trimmer through heavy shrubbery. This can cause the
blades to bind and slow down. If the blades slow down, reduce the pace of your
work.
When trimming new growth, use a wide sweeping action, so that the stems are
fed directly into the cutting blade. Older growth will have thicker stems and will be
trimmed most easily by using a back-and-forth motion.
Always cut stems or twigs that are less than 1.2 in (30.5 mm). thick. Use a non-
powered hand saw or pruning saw to trim large stems.
Loading ...
Loading ...
Loading ...