Loading ...
Loading ...
Loading ...
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
2). Move the main body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
2.2.2 Ceiling Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Steps:
1. Loosen screws to take apart the junction box.
2. Paste the drill template for junction box to the
installation location.
3. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
4. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
5. Secure the junction box body on the ceiling with
four PA4 × 25 screws according to the actual object.
Junction Box Body
Figure 2-9 Secure Junction Box Body
6. Fix the base to the junction box cover with three M4
× 10 screws.
Junction Box Cover
Base
Figure 2-10 Fix Base to Junction Box Cover
7. Fix the junction box cover to the junction box body
with three M3 screws.
Junction Box Cover
Junction Box Body
Base
Figure 2-11 Fix Junction Box Cover to Junction Box Body
8. Route the cables through the bottom cable hole or
the side cable hole of the junction box.
9. Refer to step 6 of 2.2.1 Ceiling Mounting without
Junction Box to adjust the angle and finish the
installation.
Figure 2-12 Finish Installation
2.2.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
Loading ...
Loading ...
Loading ...