Loading ...
Loading ...
Loading ...
1. Drill Ø10 mm screw holes in the wall where you
want to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
Figure 2-13 Fix Wall Mount
3. Use three M4 × 10 screws to fix the base onto the
wall mount.
Figure 2-14 Fix Base
4. Refer to steps 4 to 6 of 2.2.1 Ceiling Mounting
without Junction Box to finish installation.
Figure 2-15 Finish Installation
2.3 Installation of Type III Camera
2.3.1 Ceiling Mounting Without Junction Box
Steps:
1. Insert a coin or another tool into the notch, and
press down to dissemble the camera.
Coin
Figure 2-16 Dissemble Camera
2. Paste the drill template (supplied) to the place
where you want to install the camera.
3. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
4. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
5. Use two PA4 × 25 screws (supplied) to secure the
base to the ceiling.
Loading ...
Loading ...
Loading ...