Loading ...
Loading ...
Loading ...
6. Route the cables through the bottom cable hole or
the side cable hole of the junction box.
7. Combine the junction box cover with the base of the
camera and secure it with two M4 × 10 screws.
Junction Box Cover
Camera Base
Figure 2-21 Combine Junction Box Cover and Camera
Base
8. Fix the junction box cover onto the junction box
body with three M3 screws.
Junction Box Body
Junction Box Cover
Camera Base
Figure 2-22 Combine Junction Box Cover and Junction
Box Body
9. Connect the power cord and video cable and put
the cables back into the junction box.
10. Repeat the steps 6 to 9 of 2.3.1 Ceiling Mounting
Without Junction Box to finish the installation.
Figure 2-23 Finish Installation
2.3.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill Ø10 mm screw holes in the wall where you
want to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
Figure 2-24 Fix Wall Mount
3. Loosen the set screw.
4. Refer to step 1 of 2.3.1 Ceiling Mounting Without
Junction Box to dissemble the camera.
5. Use two M4 screws to fix the base onto the wall
mount.
Loading ...
Loading ...
Loading ...