Perlick H80CIMWAD Owner's Guide

Loading ...

PERLICK RESIDENTIAL UNDERCOUNTER CUBELET ICE MAKER PRODUCT MANUAL

28 | perlick.com/residential

MAINTENANCE

CLEANING AND SANITIZING INSTRUCTIONS

The appliance must be cleaned and sanized at least twice a

year. More frequent cleaning and sanizing may be required

in some condions.

To prevent injury to individuals and damage

to the appliance, do not use ammonia type cleaners.

Carefully follow any instrucons provided

with the cleaning and sanizing soluons.

Always wear liquid-proof gloves and goggles

to prevent the cleaning and sanizing soluons from coming

into contact with skin or eyes.

DANGER

Do not use ice made from the cleaning and

sanizing soluons. Aer cleaning and sanizing, be careful

not to leave any soluon in the appliance.

Do not place ngers or any other objects

into the ice discharge opening (extruding head).

DANGER

1. Cleaning Soluon

Dilute 1.6 . oz. (47 ml or 3.2 tbs) of Nu-Calgon “Liquid Ice

Machine Cleaner” with 1 qt (1 l) of warm water. This is a

minimum amount. Make more soluon if necessary.

For safety and maximum eecveness, use

the soluon immediately aer diluon.

2. Cleaning Procedure

1) Move the control switch to the “OFF” posion.

2) Remove all ice from the storage bin.

3) Move the control switch to the “DRAIN” posion.

4) Allow the water system to drain for 1 minute.

5) Move the control switch to the “OFF” posion.

6) Using a clean funnel and hose (not included),

pour 1 qt (1 l) of cleaning soluon over the extruding

head (See Fig. 24.) Allow the appliance to sit for

10 minutes before operaon.

7) Make sure at least 10 minutes have elapsed since you

poured the cleaning soluon over the extruding head,

then move the control switch to the “ICE” posion.

8) Allow the appliance to make ice for 20 minutes, then

move the control switch to the “DRAIN” posion.

9) Allow the water system to drain for 1 minute.

10) Move the control switch to the “ICE” posion.

11) Aer the gear motor starts, move the control switch

to the “DRAIN” posion.

12) Allow the water system to drain for 1 minute.

13) Move the control switch to the “OFF” posion. In

severe water condions, repeat the cleaning

procedure.

Fig. 24

Slope

Scoop Holder

Extruding Head

Funnel and Hose

(not included)

CAUTION

Loading ...

Perlick H80CIMWAD 15 Inch Panel Ready Cubelet Ice Maker with Soft Compacted Ice, Pellet/Nugget

Owner's Guide - Page 28