Smeg SIM3844MB Induction Hob 80 cm

User manual EN - Page 9

For SIM3844MB.

PDF File Manual, 22 pages, Read Online | Download pdf file

SIM3844MB photo
Loading ...
Loading ...
Loading ...
USE - 3391477A928/D
e
USE
Preliminary operations
Remove any protective film from the outside
or inside of the appliance, including any
accessories (if present).
Remove any labels (apart from the technical
data plate).
Cookware suitable for use in induction
cooking
Cookware used on the induction cooking
surface must be made of metal, with magnetic
properties and a sufficiently large base.
Suitable cookware:
Enamelled steel cookware with thick bases.
Cast iron cookware with an enamelled
base.
Cookware in multilayer stainless steel, ferritic
stainless steel and aluminium with a special
base.
Unsuitable cookware:
Copper, stainless steel, aluminium, fireproof
glass, wood, ceramic and terracotta
cookware.
Advice on energy-saving
To see whether the pan is suitable, bring a
magnet close to the bottom: if it is attracted, the
pan is suitable for induction cooking. If you do
not have a magnet, you can put a small amount
of water in the pan, place it on a cooking zone
and start the hot plate. If the symbol appears
on the display, it means the pan is not suitable.
Cookware diameters
To ensure that the appliance detects the
containers correctly and for best results, use the
pan sizes indicated in the following table.
Bear in mind the following:
Pans should not extend beyond the lines
marked on the surface of the appliance.
Do not place pans near to the edges of the
glass ceramic surface or close to the control
panel.
If you use a griddle, it must have a maximum
size of 36 x 24 cm for zones 1 - 2 and 36 x
20 cm for zones 3 - 4.
Do not use a griddle on zones 5 and 6.
Basic functions
First power connection
When connected to the power supply for the
first time, or after power has been switched
back on after a power failure, an automatic
check is carried out that control turns on the
indicator lights and the displays for a few
seconds. Afterwards, the appliance can be
used normally.
Switching on and off
Press and hold the button for at least one
second to switch on the appliance. To turn off
the appliance, press the button until a sound
is emitted. The appliance will switch off
automatically after about 10 seconds of
inactivity.
Summary table of power levels
The power can be adjusted to various levels.
The table below shows the levels suitable for
See General safety instructions.
Cooking zones
Minimum diam-
eter (mm)
Recommended
diameter (mm)
1 - 2 (Single) 90 - 110 170 - 190
1 - 2 (Bridge) 190 - 230 240
3 - 4 (Single) 90 - 110 160 - 180
3 - 4 (Bridge) 190 - 230 200
5 70 - 90 160
6 110 - 130 250
Loading ...
Loading ...
Loading ...