Loading ...
Loading ...
Loading ...
INSTALLATION - 4391477A928/D
e
• 220-240 V 1N~
Three-core cable 3 x 1.5 mm².
Fixed connection
Fit the power line with an all-pole circuit breaker
with a contact separation distance sufficient to
provide complete disconnection in category III
overvoltage conditions, pursuant to installation
regulations.
For the Australian/New Zealand market:
The circuit breaker incorporated in the fixed
connection must comply with AS/NZS 3000.
Section cut from the countertop
Safety instructions for positioning and
installation
• Installation can be carried out on various
materials such as masonry, metal, solid
wood or plastic laminated wood as long as
they are heat resistant (>90°C).
• Veneers, adhesives or plastic coatings on
adjacent furniture should be temperature-
resistant (>90°C), otherwise they might
warp over time.
• If the piece of furniture does not have the
required recess opening, either it will have
to be cut or masonry work carried out by a
competent technician.
• The minimum clearance between exhaust
hoods and the cooking surface must be at
least the distance indicated in the exhaust
hood installation instructions.
• The minimum clearances must also be
respected for the edges of the hob on the
back as indicated in the assembly
instructions.
• If the appliance is to be installed above an
oven, the oven must be fitted with a cooling
fan.
Appliance overall dimensions (mm)
Standard and flush mounting (mm)
Flush mounting
For this type of mounting, you have to make an
additional cut at the edges of the recess in the
furniture if you wish to install the hob flush with
the countertop.
For all types of connection, use the
jumper provided.
See General safety instructions.
L
38 cm models 380
60 cm models 600
80 cm models 800
A B C D E
min 150 min 460 min 750 20 - 60 min 50
L X Y G H
380 310 490 384 514
600 560 478÷490 604 514
800 730 480 804 514
Loading ...
Loading ...
Loading ...