Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 4191477A928/D
e
possible settings:
Refer to the table below to select the most
suitable value according to the power limitation
of the appliance:
Option U9 allows you to activate or deactivate
the Auto-Vent 2.0 function:
• 0: function off.
• 1: function on.
Exiting the user menu
There are two ways to exit from the user menu:
1 Press the button. Any modifications will
be discarded and the hob will be switched
off.
Or
2 Press the button for at least two
seconds. The modifications will be saved
and the hob will be switched off.
Error notifications
If the appliance malfunctions or operates
incorrectly, the associated error code appears
on the display.
The error codes always begin with the letter “E”
or “Er” followed by a series of digits (e.g. “Er47-
30”).
Errors coded as:
• “E02”
•“E2”
• “Er21”
Indicate that the appliance or part of it is
overheating. If this occurs, you should switch off
the appliance immediately, remove all pans and
let it cool down.
If these errors persist or if other errors appear,
make a note of the code and contact Technical
Support.
CLEANING AND MAINTENANCE
Cleaning the glass ceramic hob
Cleaning the surfaces
To keep the surfaces in good condition, they
should be cleaned regularly after use. Let them
cool first.
Ordinary daily cleaning
Always and only use specific products that do
not contain abrasives or chlorine-based acids.
Pour the product onto a damp cloth and wipe
the surface, rinse thoroughly and dry with a soft
cloth or a microfibre cloth.
Weekly cleaning
Clean and maintain the hob once a week using
an ordinary glass ceramic cleaning product.
Always follow the manufacturer’s instructions.
The silicon in these products creates a
protective, water-repellent membrane which
also resists dirt. All marks stay on the membrane
and can therefore be removed easily. After
cleaning, dry the surface with a clean cloth.
Make sure that there is no detergent left on the
cooking surface as it might undergo an
aggressive reaction when heated up and could
modify the structure of the cooking surface.
Food stains or residues
Light coloured marks from pans with aluminium
bases can be easily cleaned off with a cloth
moistened in vinegar. Remove any burnt-on
residues after cooking; then rinse with water and
dry thoroughly with a clean cloth. Dirt, which
Hardness
level
Hood
lighting
Hood fan speed
Delicate
cooking
Medium
cooking
Intense
cooking
0Off Off
1On Off
2 - 4 - 6 On Off speed 1 speed 2
3 - 5 - 7 On speed 1 Speed 2 Speed 3
Hardness level Power limitation
2 - 3 up to 4 kW
4 - 5 from 4 to 5 kW
6 - 7 5 kW upwards
If the appliance is set to a lower power
level lower than the one indicated in the
table above, it may not be possible to
select some of the fan speeds.
See General safety instructions.
In case of stubborn dirt, clean when
cold using a damp kitchen sponge and
neutral detergent; then dry with a
microfibre cloth.
Loading ...
Loading ...
Loading ...