Loading ...
Loading ...
Loading ...
Pelco Fisheye Installation Manual
C6710M | 12/21
23
Mounting the Camera Using the Side Conduit Entry Hole
Perform the following steps if the required cables will be run along the mounting surface. Use this
procedure if the mounting surface is difficult to drill into, or if the cables must be routed outside of the
mounting surface.
1. Using the Surface Mounting Template, drill 3 pilot holes into the mounting surface for the mounting
screws.
If you are mounting the camera to a wall, make sure the up orientation arrow is at the top, or the
video image will be rotated. For more information, see Mounting in the Correct Orientation.
Loading ...
Loading ...
Loading ...