Loading ...
Loading ...
Loading ...
Pelco Fisheye Installation Manual
C6710M | 12/21
19
b. Crimp the connector onto the Ethernet cable.
3. If you are using other cables, pull one or both of the tabs on the grommet to open the secondary
holes for the additional cables.
4. Thread the additional cables through the secondary grommet holes.
Threading thin cables through the secondary holes may require the use of silicone sealant at the
opening to ensure weather proofing.
5. Do not connect the cables to the camera until indicated in the installation procedure.
Surface Mount Installation
Required Tools and Materials
The following tools are required to complete the installation but are not included in the package:
l Appropriate tool for cutting the cable access hole
l Small slotted screwdriver with 5/64” or 2 mm blade width — for connecting power when not using
Power over Ethernet
l No. 2 Phillips screwdriver — for attaching camera to an electrical box or mounting surface
Camera Package Contents
Ensure the surface mounted camera package contains the following:
l Pelco IMF Fisheye Camera
l Camera Base Mounting Template sticker
l Optional wall plate adapter — for electrical box installations.
l Star-shaped screwdriver
l Power terminal block
l Optional conduit shroud — for side-entry conduit cabling.
l 3x screws and anchors — for securing the camera to the mounting surface.
Loading ...
Loading ...
Loading ...