Loading ...
Loading ...
Loading ...
1662/1663/1664 FC
Users Manual
18
Error Codes
Various error conditions are detected by the Tester and are indicated with
W, Err, and an error code on the primary display. See Table 9. These
error conditions disable or stop the test.
Table 9. Error Codes
apx032f.eps
Error Condition Code Solution
Self-Test Fails 1
Return the Tester to a Fluke Service Center.
Secondary display shows additional code:
1: Unable to communicate with Analog board
2: Analog board operating variables errors
4: Fuse 1 error
8: Fuse 3 error (display shows FUSE)
16: Analog board ID does not match expected value
32: Digital flash CRC fault
64: Analog flash CRC fault
Over-Temp 2 Wait while the Tester cools down.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...