Loading ...
Loading ...
Loading ...
ɺ
TROUBLESHOOTING
15
15
CorrectionCauseProblem
1. Must be an operator at the operator
position.
2. Ensure the PTO shaft is connected to
the Tractor gearbox.
3. Replace PTO shaft.
4. Tighten or replace deck belt.
5. Tighten or replace engine-to-gearbox
belt.
6. Ensure clutch wiring is properly
connected to clutch and harness.
7. Replace clutch.
1. Operator presence not engaged.
2. PTO shaft not connected to Tractor
Gearbox.
3. Bent or Damaged PTO shaft.
4. Loose or damaged deck belt.
5. Loose or damaged engine-to-
gearbox belt (Tractor).
6. Loose or faulty clutch wiring harness.
7. Faulty clutch.
No Power To
Blades
1. Replace blade(s); Tighten blade bolt.
2. Clean underside of mower deck.
3. Replace blade driver assembly or
components.
1. Worn, bent or loose blade(s).
2. Buildup of debris under deck.
3. Faulty /damaged blade driver
assembly or components.
Poor Cutting
Performance
1. Replace faulty fuse.
2. Ensure wire harness is connected.
1. Faulty fuse.
2. Wire harness not fully connected.
Loss of Power
To Engine
1. Replace blade(s); Tighten blade bolt.
2. Replace blade driver or
component(s).
3. Tighten loose part(s) and/or
hardware; Check for damage.
4. Replace blade driver assembly.
5. Replace or tighten PTO shaft and
any associated hardware.
1. Worn, bent or loose blade(s).
2. Bent or damaged blade driver
component(s).
3. Loose part(s) and/or fastener
hardware.
4. Faulty blade driver assembly.
5. Damaged or loose PTO Shaft.
Excessive
Vibration
1. Make sure control levers are in the
middle of their travel.
2. Charge or replace the battery.
3. Reset circuit breaker at engine.
.
1. Control levers not in neutral position.
2. Battery is undercharged or failing.
3. Circuit breaker on engine tripped.
Engine Will Not
Turn Over
Note: Refer to the tractor manual for more troubleshooting tips that may include other
symptoms or causes not included in this list.
Loading ...
Loading ...
Loading ...