Loading ...
Loading ...
Loading ...
INSTALLATION REQUIREMENTS
ELECTRICAL CONNECTION
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect electrical power at the
circuit breaker box or fuse box before
installing the appliance. Provide
appropriate ground for the appliance.
Use copper conductors only. Failure to
follow these instructions could result in
serious injury or death.
ELECTRICAL GROUNDING
This appliance is equipped with a three-prong plug for your
protection against shock hazard and should be plugged
directly into a properly grounded socket. Do not cut or
remove the grounding prong from this plug.
CAUTION
Label all wires prior to disconnecting
when servicing controls. Wiring errors
can cause improper and dangerous
operation. Verify proper operation after
servicing.
The appliance shall be connected to a single phase electric
line rated at 120/208Vac or 120/240Vac and 60Hz
frequency.
TYPE
VOLTAGE CIRCUIT
RATING
ELECTRI-
CAL
SUPPLY
48″ IND
DFS
120/208V
72.5A
50A
120/240V
77A
50A
Install a suitable electric power supply receptacle
connection type NEMA 14-50R able to support a load of at
least 50 A (per line) according to local code requirements.
For four or three wires power supply connection system
see diagram below.
Fig. 7 FOUR-WIRE CONN.RECEPTACLE NEMA 14-50R
Check your local code for which of the options below
should be used in grounding the receptacle power supply
connections.
16
Loading ...
Loading ...
Loading ...