Electrolux EKG5302X 50cm Ultimatetaste 300 Cooking Range With 3 Gas Burners And 62l Electric Oven

User Manual - Page 7

For EKG5302X.

PDF File Manual, 29 pages, Read Online | Download pdf file

EKG5302X photo
Loading ...
Loading ...
Loading ...
installed, the necessary air can come from a room nearby, provided that this room is not a
bedroom or a dangerous environment and it is ventilated as described above.
Combustion Products Discharge
Gas cooking units must discharge combustion products through hoods directly connected
to flues or outside. In case the hood can't be installed, it is recommended to use an electric
fan applied to the external wall or to the window of the room, with condition that
openings to let air flow in the room are realized.
This electric fan must be powerful enough to ensure in a kitchen an air replacement of 3 to
5 times its volume per hour.
WARNING - If the oven touches the side of other pieces of the kitchen
furniture, ensure they can withstand a temperature of 75
.
ELECTRICAL CONNECTION
Before you connect the gas cooker, please check the voltage indicated on the rating plate
to ensure that it corresponds to the main power supply available. Appliance must be
connected with main supply outlet. The ground wires are easily recognized by its green
and yellow colour. Make sure that the "line" and "neutral" wires are installed into their
correct terminals. The installation must be carried out by an authorized technician only.
Before connecting to the electric supply, make sure that:
1. The protection fuse and the domestic wiring are suitable to carry the total electric
load of the cooker.
2. The electricity supply network (main) has an efficient earth connecting according
to the established rules and existing regulations.
3. The cooker wire is long enough to reach the socket from where your cooker is
situated.
THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY ACCIDENT
CAUSED BY NON OBSERVANCE OF SAFETY INSTRUCTION.
GAS HOSE CONNECTION
First connect one end of the rubber hose to the gas regulator and tighten it with a hose
clamp. The other end should be pushed tightly into the gas hose connector. Tighten it with
a hose clamp, make sure that both ends are tighten otherwise gas might leak and this could
6
Loading ...
Loading ...
Loading ...