Loading ...
Loading ...
Loading ...
USING THE HOTPLATE
The hotplates are controlled by heating switch on the control panel.
By switching the control knob to any position from 1 and to 3, with 3 being the hottest,
the hotplate can be operated. Near each hob control knob, there is a small diagram that
shows which hotplate is controlled with that knob. On/off light on the control panel shows
if any of the hotplates are in use.
Before using the plates for the first time, switch them on for four minutes at the highest
setting .This allows the factory applied protective coating to burn in.
WARNING
• Use only flat pans and with a sufficiently thick base.
• Never use a pan with a smaller diameter than of the hotplate.
• Ensure that the base of the pan is dry before placing it on the hotplate. While the
hotplate is in operation, it is important to ensure that the pan is centered correctly
above the hotplate.
• Never operate the hob without pans on the hotplate.
• The temperature of accessible parts maybe high when the appliance is operating.
So it is imperative to keep children and animals out of the reach of the hotplate
during and after the operation.
• If you note a crack on the hotplate it must be immediately switched off and
replaced. Contact the nearest Service Center.
• Do not pour liquids onto the hotplate while hot
• Please switch off all hotplates when not in use.
13
Loading ...
Loading ...
Loading ...