Loading ...
Loading ...
Loading ...
50
Before you caLL
oven problems
problem cause / Solution
Poor baking results. Many factors aect baking results. Use proper oven rack position. Center food in
the oven and space pans to allow air to circulate. Preheat the oven to the set tem-
perature before placing food in the oven. Try adjusting the recipe’s recommended
temperature or baking time. See “Adjusting the Oven Temperature” on page 38 if
you feel the oven is too hot or too cool.
Flames inside oven or smok-
ing from oven vent.
Excessive spills in oven. Grease or food spilled onto the oven bottom or oven cavity.
Wipe up excessive spills before starting the oven. If flames or excessive smoke are
present when using broil, see “Using the Broil Feature” on page 31.
Oven smokes excessively
when broiling.
Incorrect setting. Follow the “Using the Broil Feature” on page 31.
Meat too close to the broil element or burner. Reposition the broil pan to provide
proper clearance between the meat and broil element or burner. Remove excess fat
from meat. Cut remaining fatty edges to prevent curling, but do not cut into lean.
Grease build up on oven surfaces. Regular cleaning is necessary when broiling fre-
quently. Grease or food splatters will cause excessive smoking.
Oven control panel beeps
and displays any F or E code
error.
Oven control has detected a fault or error condition. To clear the error, press the
OFF key on the control panel. Once the error code is cleared, try the bake or broil
function. If the F or E code error repeats, turn o the power to appliance, wait 5
minutes, and then re-power the appliance. Set the clock with correct time of day.
Try the bake or broil function again. If the fault recurs, press the OFF key to clear.
Oven portion of appliance
does not operate.
The time of day is not set. The clock must be set in order to operate the oven. See”-
Setting the Clock” on page 23.
Be sure the oven controls are set properly for the desired function. See “Oven Con-
trol Features” starting on page 22 and review instructions for the desired cooking
function in this manual or see “Entire appliance does not operate.” in this checklist.
Convection fan does not
rotate.
Oven door is open. The convection fan will turn o if the oven door is opened when
convection is active. Close the oven door.
other problems
problem cause / Solution
Appliance is not level. Be sure the floor is level, strong, and stable enough to adequately support
the range.
If the floor is sagging or sloping, contact a carpenter to correct the situa-
tion.
Poor installation. Place the oven rack in the center of the oven. Place a level
on the oven rack. Adjust the leveling legs at the base of the appliance until
the rack is level.
Kitchen cabinet alignment may make range appear not level. Be sure cabi-
nets are square and have sucient room for appliance clearance.
Cannot move appliance
easily. Appliance must be
accessible for service.
Cabinets not square or are built in too tightly. Contact the builder or install-
er to make the appliance accessible.
Carpet interferes with appliance. Provide sucient space so the appliance
can be lifted over carpet. Installation over carpet is not advised. See the
installation instructions for guidelines specific to your appliance.
Oven light does not work. Be sure the oven light is secure in the socket. See ”Replacing the Oven
Lights” on page 46.
Loading ...
Loading ...