Loading ...
Loading ...
Loading ...
HomeConnect en
19
To be able to use HomeConnect,
you must first set up the connection
to the WLAN home network (Wi-Fi
1
)
and to the HomeConnect app.
After switching on the appliance, wait
at least 3minutes until internal
device initialisation is complete. Only
then should you set up HomeCon-
nect.
The HomeConnect app guides you
through the entire login process. Fol-
low the instructions in the HomeCon-
nect app to configure the settings.
Tip:Please also follow the instruc-
tions in the HomeConnect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the HomeConnect app.
→"Safety", Page4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
HomeConnect app.
10.1 Setting up the
HomeConnect app
1. Install the HomeConnect app on
your mobile device.
2. Start the HomeConnect app and
set up access for HomeConnect.
The HomeConnect app guides
you through the entire login pro-
cess.
10.2 Setting up HomeCon-
nect
Requirements
¡ The HomeConnectapp has been
installed on your mobile device.
¡ The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
1. Open the HomeConnect app and
scan the following QR code.
RFSM0Z01
2. Follow the instructions in the
HomeConnect app.
10.3 Switching on the con-
nection to the WLAN
home network (Wi-Fi)
▶ Press
.
10.4 Switching off the con-
nection to the WLAN
home network (Wi-Fi)
▶ Press
.
10.5 Installing updates for the
HomeConnectsoftware
Note:If an update of the HomeCon-
nect software is available, a message
appears in the HomeConnect app.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Loading ...
Loading ...
Loading ...