Loading ...
Loading ...
Loading ...
14 15
ENEN
Clean the Dust Bin
Clean the Filter
Routine Maintenance
1. Open the robot cover, then press the dust
bin clip to remove the dust bin.
2. Open the bin cover and empty the
bin as shown in the diagram.
3. Clean the dust intake.
2. Do not wash the lter. Only the dust bin is washable. Thoroughly dry it before re-installing.
1. Remove the lter and tap its basket gently.
Note:
· Do not attempt to clean the lter with brushes or ngers.
· Rinse the dust bin with clean water only. Do not use any detergent.
· Only use the dust bin and lter when they are completely dry.
· The lter is recommended to be cleaned every two weeks and replaced every three months.
* Clean after each use
7. Use the Mopping Function
How to Use
It is recommended that all oors are vacuumed at least three times before
the rst mopping session to achieve a better cleaning eect.
1) Dampen the mop pad and wring out excess water. Insert the mop pad into
the slot of the water tank as shown in the gure, and paste the pad rmly.
3) Align the mopping module as indicated by the arrow, then slide it into the
back of the robot until it clicks into place. Press the button or use the app
to start cleaning.
2) Open the water tank lid, ll the tank with water, then securely close the lid.
4) Press the two side clips inwards and slide the water tank backwards to
separate it from the robot.
Note:
• It is not recommended to use the mopping function on carpets.
• Use the app to adjust the water ow as required.
Note: Do not use detergent or disinfectant.
Note: When the robot is charging or not in use, remove the mopping module,
pour out all the remaining water in the tank, and clean the mop pad to prevent
mildew or odors.
Click
Click
① ② ③
Loading ...
Loading ...
Loading ...