Loading ...
Loading ...
Loading ...
14
Hob2Hood*
* It is an automatic function which
connects the hob with a hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting
and temperature of the hottest cookware
on the hob. You can also operate the fan
using he hob manually. The function can
be activated from panel of the hob.
*For applicable models only.
For more information how to use the
function refer to the hob user manual.
Hints and Tips for Hob2Hood function
When you operate the hob with
Hob2Hood function:
• Protect the hood panel from direct
sunlight.
• Do not spot halogen light on the hood
panel.
• Do not cover the hob panel.
• Do not interrupt the signal between
the hob and the hood (for example
with a hand or a cookware handle).
It may happen that other remote
controlled appliances may block the
signal. To avoid it do not operate the
remote of the appliance and the hob at
the same time.
To find the full range of rangehoods
which work with this function refer to
our consumer website. The rangehoods
that work with this function must have
the symbol or
Activate and deactivate the
filter notification
1. Switch on the control panel.
2. Make sure that the Fan Speed is
turned off.
3. To activate or deactivate the carbon
filter press button 'Fan Speed 2'
for 5 seconds.
When the Carbon Filter Notification
is enabled, the Fan Speed 2
flashes(white) for a few seconds.
When the Carbon Filter Notification is
disabled, the Fan Speed 2 lights
up(white) for a few seconds.
Please do not enable "Carbon Filter
Notification" when not using the hood in
recirculation configuration.
Loading ...
Loading ...
Loading ...