Loading ...
Loading ...
Loading ...
What if ... Possible fault Solution
The heat
exchanger unit
service panel will
not shut.
The inner cover of the heat
exchanger unit has not been
locked properly and/or the
heat exchanger unit has not
been positioned correctly.
Lint has collected at the
bottom of the condenser unit
housing.
–
Ensure that the heat
exchanger unit is
positioned correctly and
lock the cover.
–
Check the rubber seals.
–
Use a cloth to remove any
lint from the inside of the
condenser unit housing.
Water leaks form
the machine after
the heat exchanger
unit has been
cleaned.
Items made of
synthetic fabrics
have static cling
after drying.
Synthetics are prone to
static cling.
Use liquid fabric softener in
the last rinse of the wash to
minimize the static cling
during drying.
Lint has built up. Lint is the result of friction
caused by items being worn
and washed. This lint is
loosened during drying. It
has been established by
research institutes, that
dryers have no detrimental
effects on the lifetime of
fabrics.
The lint is collected in the
lint filters and can be easily
cleaned (see "Cleaning and
Care").
Frequently asked questions
31
Loading ...
Loading ...
Loading ...