Loading ...
Loading ...
Loading ...
User Manual of Network Speed Dome
© Hikvision
60
3. The event triggered and park action related PTZ movement will be locked for 180 seconds
after you enter the line crossing detection interface. Optionally, you can click the
button to manually activate the movement, or lock the movement
when the button turns to
by clicking it.
4. Select the region from the dropdown list for detection settings.
5. Click the
button to start the region drawing.
6. Click on the live video to specify the four vertexes of the detection region, and right click to
complete drawing.
Repeat the step to configure other regions. You can click the
button to clear all
pre-defined regions.
7. Configure the parameters for each detection region separately.
Sensitivity: The value of the sensitivity defines the size of the object which can trigger
the alarm, when the sensitivity is high, a very small object can trigger the alarm.
8. Click
tab to enter the arming schedule setting interface. The time
schedule configuration is the same as the settings of the arming schedule for motion
detection. Refer to Section 5.2.1 Configuring Motion Detection for more details.
9. Click
tab to select the linkage method taken for the region entrance alarm,
Notify surveillance center, send email, upload to FTP, trigger channel, smart tracking, White
Light Flashing, Audible Warning, and trigger alarm output are selectable.
For speed dome, you can also choose to link smart tracking. Smart Tracking should be
configured in advance.
For certain models, White Light Flashing and Audible Warning are supported. Refer to
Section 5.2.1 Configuring Motion Detection for detailed configuration.
10. Click to save the settings.
5.3.6 Configuring Region Exiting Detection
Purpose:
Region exiting detection function detects people, vehicle or other objects which exit from a
pre-defined virtual region, and some certain actions can be taken when the alarm is triggered.
Steps:
1. Enter the Region Exiting Detection settings interface:
Configuration> Event > Smart Event> Region Exiting Detection
2. Check the checkbox of Enable to enable the Region Exiting Detection function.
Loading ...
Loading ...
Loading ...