Loading ...
Loading ...
Loading ...
User Manual of Network Speed Dome
© Hikvision
91
existing network without entering long passphrases. There are two modes of the WPS
connection, the PBC mode and the PIN mode.
PCB Mode
PBC refers to the Push-Button-Configuration, in which the user simply has to push a
button, either an actual or virtual one (as the Connect button on the configuration
interface of the IE browser), on both the Access Point (and a registrar of the network)
and the new wireless client device.
PIN Mode
The PIN mode requires a Personal Identification Number (PIN) to be read from either a
sticker or the display on the new wireless device. This PIN must then be entered to
connect the network, usually the Access Point of the network.
Steps:
1. Choose a wireless connection on the Wi-Fi List and the SSID is loaded automatically.
2. Input Router PIN code, if the PIN code is generated from the router side.
3. Click Connect.
OR
You can generate the PIN code on the camera side. And the expired time for the PIN code
is 120 seconds.
Steps:
1. Click Generate. And the code displays in PIN Code text field.
2. Input the code to the router.
Integration Protocol
Purpose:
If you need to access to the camera through the third party platform, you can enable
Hikvision-CGI function. And if you need to access to the device through ONVIF protocol, you can
configure ONVIF user in this interface. Refer to ONVIF standard for detailed configuration rules.
Steps:
1. Enter the Integration Protocol configuration interface.
Configuration > Network > Advanced Settings > Integration Protocol
Loading ...
Loading ...
Loading ...