Loading ...
Loading ...
Loading ...
VIVOTEK
294 - User's Manual
© 2022 VIVOTEK INC. All Right Reserved
150
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
eptz
0, <positive integer>
0/7
Indicate this mode whether support eptz.
For "nvideoin" = 1, the definition is as
following:
A 32-bits integer, each bit can be set
separately as follows:
Bit 0 => 1st stream supports ePTZ or not.
Bit 1 => 2nd stream
supports ePTZ or not,
and so on.
For nvideoin >= 2, the definition is
different:
First all 32 bits are divided into groups for
channel.
Ex:
nvideoin = 2, bit 0~15 are the 1st group
for 1st channel, bit 16~31 are the 2nd
group for 2nd channel.
nvideoin = 3,
bit 0~9 are the 1st group for
1st channel, bit 10~19 are the 2nd group
for 2nd channel, bit 20~31 are the 3rd
group for 3rd channel.
Then, the 1st bit of the group indicates
1st stream of a channel support ePTZ or
not. The 2nd bit of the group indicates
2nd stream of a channel support ePTZ or
not, and so on.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0304b.
wdrpro
0, 1, 2
0/7
Indicate this mode whether support WDR
pro.
0: Non-support WDR Pro
1: Support WDR Pro
2: Support WDR Pro II
* We support this parameter when the
version number (httpversion) is equal or
greater than 0304b.
effectivepixel
<WxH>
0/7
The visible area of full scene in this video
mode.
The unit is pixel in source.
* If
"effectivepixel"<"capability_videoin_c<0~
(n-1)>_maxsize", then the visible area is
located at the center of full scene.
Loading ...
Loading ...
Loading ...