Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/3010386-ds-2td1117-3-pa/bg41.png)
Before You Start
Go to Conguraon → System → Maintenance → VCA Resource Type , select Temperature
Measurement + Perimeter Protecon.
Steps
1.
Go to
Conguraon → Perimeter Protecon → Rule .
2.
Check Intelligent Analysis.
3.
Oponal: Check Enable Fusion to view opcal and thermal image.
4.
Set perimeter protecon rules.
1) Click
to add a new rule.
2) Enter the rule name, and click the drop down menu to select Rule Type.
Line Crossing
If any target moves across the seng line, the alarm will be triggered. You can set the
crossing
direcon.
Intrusion
If any target intrudes into the pre-dened region longer than the set duraon, the alarm
will be triggered.
Region Entrance
If any target enters the pre-dened region, the alarm will be triggered.
Region Exing
If any target exits the pre-dened region, the alarm will be triggered.
3) Draw the
detecon rule.
Table 7-1
Congure VCA Rules
Rule Type How to Draw and What Parameters to Set
Line
Crossing
a. Click to draw a line in the live view.
b. You can drag end points of the line to adjust the posion and length.
c. Set the crossing direcon. Bidireconal, A-to-B, or B-to-A are selectable.
d. Set
Sensivity. The higher the value is, the easier the target can be
detected.
Intrusion a. Click to draw an area in the live view. Right click the mouse to nish
drawing. It is recommended to draw three dierent areas covering the
whole detecon scene from near to far.
Thermal Network Camera User Manual
51
Loading ...
Loading ...
Loading ...