Hikvision DS-2TD1117-3/PA User Manual

Loading ...

Forkli Filter

Enable these funcons if there are forklis in the scene, or it may cause false alarm.

Select Filter Level to lter dierent objects in the detecon scene. High Temperature Object

in the high level means the object whose tempereture is higher than the pre-alarm

threshold/temperature.

Check Display Filtering Status, and an OSD will be displayed when the

funcon is enabled.

Click Restart to restart algorithm library of forkli lter.

Note

The Forkli Filter varies according to dierent camera models.

Reect Light Filter and Forkli Filter are mutually exclusive with VCA funcons.

Click Save.

Set Normal Mode

This funcon is used to measure the temperature of the whole scene and alarm.

Steps

Go to Conguraon → Temperature Measurement & Fire Prevenon → Basic Sengs , and

check Enable Temperature Measurement.

Refer to

Set Thermography Parameters to set the parameters.

Go to

Conguraon → Temperature Measurement & Fire Prevenon → Advanced Sengs ,

and select Normal.

Congure the parameters of normal mode.

Emissivity

Set the emissivity of your target. The emissivity of each object is dierent.

Distance

The distance between the target and the device.

Pre-Alarm Threshold and Filtering Time

When the temperature of target exceeds the Pre-Alarm Threshold and this status lasts not

shorter than the Filtering Time, the pre-alarm is triggered.

Alarm Threshold and Filtering Time

When the temperature of target exceeds the Alarm Threshold, and this status lasts not

shorter than the Filtering Time, the alarm is triggered.

Pre-Alarm Output and Alarm Output

Check Pre-Alarm Output and Alarm Output to link the pre-alarm or alarm with the

connected alarm device.

Temperature Sudden Change Alarm

Thermal Network Camera User Manual

Loading ...

Hikvision DS-2TD1117-3/PA Thermal Network Turret Camera