Loading ...
Loading ...
Loading ...
AXIS M3005-V Network Camera
Events
Events
The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use installed applications to trigger the rule, see Applications on page 27.
• Detectors
- Motion Detection — trigger t he rule whe n motion is detected, see Motion Detection on page 24.
- Tampering — trigger the rule when tam pering is detected, see Camera Tampering on page 24.
• Hardware
- Network — trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
• Input Signal
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on
the Live View Page on page 8 . This can for example be used to validate actions during product installation
and c onfiguration.
• PTZ
- Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used
as an additional condition to prevent an action rule triggered by m otion detection to record video while the
camera view moves due to a PTZ operation.
- Preset Reached —triggertherulewhenthecamerastopsatapresetposition.Thiscanbeforexamplebeused
with the Send Images action to upload images from the preset posi
tion.
• Storage
- Available — trigger the rule when the storage dev
ice is unmounted or removed. This can for example be
used to send maintenance notifications.
- Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be
overwritten to prevent the storage device from becoming full.
- Locked —triggertheruleifthestoragedeviceislocked(writeprotected).
• System
- System Initializing — trigger the rule when the product is being started. This can for example be used to s end a
notifi
cation when the pro duct restarts.
• T
ime
- Recurrence — trigger the rule periodically, see Recurrences on page 30. This can for example be used to upload
an image every 5 minutes.
- Use Schedule — trigger the rule a ccording to the selected schedule, see S chedules on page 30
.
Available actions include:
• PTZ Control
- Preset Position — go to a preset position.
- Guard Tour — start a guard tour, see Guard Tour on page 22.
28
Loading ...
Loading ...
Loading ...