Loading ...
Loading ...
Loading ...
CAUTION: Avoid injury! Components are installed under
spring tension. Wear eye protection and use proper tools
when installing and removing components with spring
tension.
4. Insert a 3/8 in. ratchet or breaker bar into the square hole (A) on
the idler arm, rotate the spring-loaded idler arm to relieve belt
tension on the idler sheave (B) and remove the drive belt (C) from
the idler sheave. Release the spring tension from the arm and
remove the tool.
5. Remove the drive belt from both transaxle sheaves (D).
6. Remove the drive belt from the engine sheave (E).
7. Position replacement belt onto engine sheave (E), and both
transaxle sheaves (D).
8. Rotate the spring-loaded idler arm (A) and install the belt on the
idler sheave (B).
9. Connect electric clutch wiring harness connector (A) to main
wiring harness.
10. Install mower deck.
gh8xt3t,1654601593685-19-13JUN22
Service Mower
Mower Deck Identication
Mower decks in the following instructions are identied by a code
designation. The codes are as follows:
Code Description
42A 42 inch Accel Deep™
48A 48 inch Accel Deep™
54A 54 inch Accel Deep™
Accel Deep is a trademark of Deere & Company
MX52301,0000F0A-19-28MAR16
Removing and Installing Mower Deck Foot Plate
CAUTION: Avoid injury! Always operate the mower with the
foot plate installed. Operating with the foot plate removed
can cause serious injury.
Removing Foot Plate
1. Park machine safely. (See Parking Safely in the Safety section.)
GX536025—UN—25APR22
2. Lift the front end of the foot plate (A).
3. Using both hands, pull the foot plate out of the two openings (B) in
the frame.
Installing Foot Plate
1. Using both hands, position the foot plate (A) into the two openings
(B) in the frame.
2. Lower the foot plate until it rests securely in place.
H9PQBYK,0000051-19-25APR22
Removing Mower Deck (42A)
1. Park machine safely. (see parking safely in the safety section.)
2. Allow engine and mufer to cool completely.
CAUTION: Avoid injury! Rotating blades are dangerous.
Before adjusting or servicing mower:
● Disconnect spark plug wires or battery negative (-) cable
to prevent engine from starting accidentally.
● Always wear gloves when handling mower blades or
working near blades.
APY69519—UN—08MAR22
3. Rotate the height-of-cut dial (A) in clockwise direction to the lowest
range in index mark (B) to lower deck to 1.25" height-of-cut for
lockout position.
GX536026—UN—25APR22
4. Lift the front end of the foot plate (A) and remove the foot plate from
the slots (B).
Service Mower
35
Loading ...
Loading ...
Loading ...