Loading ...
Loading ...
Loading ...
2. To turn sharply to the left, push right control lever (C) forward and
pull left control lever (D) rearward at the same time.
Right Turn
GX536023—UN—25APR22
1. To turn slightly to the right, push left control lever (D) further forward
than the right control lever (C).
APY536684—UN—28APR22
2. To turn sharply to the right, push left control lever (D) forward and
pull right control lever (C) rearward at the same time.
GH8XT3T,00009BC-19-10JUN22
Using Dual Levers (If Equipped)
GX535573—UN—07JUN22
Dual lever for Model Z320R, Z320M
1. Pull the choke lever (A) down when starting a cold engine.
2. After engine has started, push the choke lever (A) up completely to
the previous position.
3. Push the throttle lever (B) down to increase the engine speed.
4. Pull the throttle lever (B) up towards tortoise as shown in graphics
to decrease the engine speed.
GH8XT3T,00008D8-19-12JUN22
Starting the Engine
CAUTION: Avoid injury! Engine exhaust fumes contain
carbon monoxide and can cause serious illness or death.
Do not run an engine in an enclosed area, such as a garage,
even with doors or windows opened.
Move the machine to an outside area before running the
engine.
1. Sit on the operator’s seat.
2. Set both motion control levers to the start/shutdown position.
3. Push the mower engagement knob down to disengage the mower.
4. Adjust throttle lever to set engine speed:
● Cold Start: Set throttle control to the Start position, full throttle
Use the choke control as necessary (if equipped).
● Warm Start: Set throttle control to the mow position, full throttle.
IMPORTANT: Avoid damage! Starter may be damaged if the
starter is operated for more than 20 seconds at a time:
NOTE: Wait two minutes before trying again if engine does not start.
5. Turn key switch to the START position.
6. After engine starts, release key switch to the RUN position,
disengage the choke control (if equipped), and move throttle to the
mow position, full throttle.
IMPORTANT: Avoid damage! Unnecessary engine idling may
cause engine damage. Excessive idling can cause engine
overheating, carbon buildup, and poor performance.
7. Allow the engine to warm up for 20 seconds.
Operating
21
Loading ...
Loading ...
Loading ...