Loading ...
Loading ...
Loading ...
4 5
UNPACKING AND ASSEMBLY
2 - Empty the combustion chamber
by removing the oven parts and
documentation from inside the
chamber.
3 - Remove the laser protective
lm from all stainless steel parts,
such as: sill, door, ue and chimney.
Use a hair dryer to speed up the
procedure and easily remove the
laser lm.
4 - Install the 4 feet.
Install the feet by screwing them
into the special housings in the
lower part of the oven.
5 - Insert the supplied battery
into the igniter.
Unscrew the igniter button, insert the
battery (E), then screw back the
ignition button. Now when pressing
the button you will see and hear a
small spark.
• Check the indicated polarity.
• Battery type: AA supplied
7 - Assemble the door.
It will be sucient to screw the
black duroplast handle (H) locking it
with the appropriate bolt
contained in the packaging.
E
H
6 - Install the ue and chimney.
Insert the ue (F) in the appropriate
housing (ange) and then insert the
chimney (G).
F
G
When you unbox the oven for
the rst time, due to shipping,
you may notice the presence of
red refractory powder on the
cooking oor.
If this is the case, you should brush
the powder o. We also recommend
to cook and discard 2 or 3 pizza
dough balls to ensure you remove
the refractory powder before
cooking and eating your rst pizza.
If your are using the oven
for the rst time or after a
prolonged period of inactivity
we recommend to extend
your pre-heating of the oven
by an extra 30 minutes to
allow the dispersion of any
humidity possibly collected by
the refractory bricks during
shipping or after prolonged
inactivity.
1 - Remove the oven packaging.
Simply remove the plastic straps (A)
and lift o the top cap (C).
A
C
Loading ...
Loading ...
Loading ...