Loading ...
Loading ...
Loading ...
C6647M (10/21) 9
Bullet Camera Models
SUPPLIED PARTS LIST
USER-SUPPLIED PARTS LIST
In addition to the standard tools and cables required for a video security installation, you will need to provide the following items:
PRODUCT LABEL
The product label lists the model number, date code, serial number, and Media Access Control (MAC) address. This information might be required
for setup. A product label is located on the bo
ttom of the camera and on the side of the product box.
GETTING STARTED
Before installing your device, thoroughly familiarize yourself with the information in the installation section of this manual.
NOTES:
• Pelco recommends connecting the device to a network that uses a Dynamic Host Configuration Protocol (DHCP) server to address devices.
• Do not use a network hub when configuring the network settings
for the device.
• To ensure secure access, place the device behind a firewall when it is connected to a network.
Qty Description
1 Bullet camera
1 Power terminal block
6 M4 x 25 mm self-tapping screws
1 RJ-45 plug cover and O-ring
6 Plastic expansion anchors
1 Torx T20 security L-key
1 Installation manual
1 Important Safety Instructions document
Qty Description
1 Cat 5e (or higher) cable with RJ-45 connector; ensure that
the cable is terminated for your application (PoE or non-PoE)
1 Flathead screwdriver
1 16-24 AWG 2 conductor cable for power (optional)
1 Up to 256 GB Micro SDHC or SDXC card capable of a minimum write speed of 10 MB/sec is recommended for recording HD video
(Optional)
1 24-28 AWG 4 or 8 multi conductor cable for alarms and/or audio (optional)
1 Tool for drilling
Loading ...
Loading ...
Loading ...