Loading ...
Loading ...
Loading ...
14. Do-Not-Disturb Mode
During the Do-Not-Disturb period, the main unit will not execute resume cleaning and scheduled
cleaning or actively broadcast voice prompts. The Do-Not-Disturb Mode is enabled by default
from 23:00 to 9:00. You can enable/disable the Do-Not-Disturb Mode or set the time period of
the mode.
During the do-not-disturb time period, the indicator will go off aer the main unit has been
charged for one minute.
16. Factory reset
Press two buons and hold for 15 seconds for a factory reset. The main unit needs to
reconnect to the app, and all related seings in the app will be cleared.
17. Firmware upgrade
The device's firmware can be upgraded through the app. During the upgrade process, the main
unit must be in the dust collection station or have a baery power more than 30%. It is not allowed
to start cleaning during the upgrade process.
15. Reset Wi-Fi
When the mobile phone cannot connect to the main unit aer reseing the password or for
other reasons, reset the Wi-Fi connection by following the actions in the app download of this
manual.
Caution
1. It is recommended to place the main unit in the charging position of the dust collection station
before starting cleaning;
2. Before using the product, arrange the desks, chairs, household items, floor objects, etc. neatly,
and clear power cords and small items laying on the ground to avoid the product being blocked
during cleaning;
3. Do not stand in front of the device while it is operating to avoid obstructing the device from
identifying the area to be cleaned;
4. It is recommended not to turn off the main unit aer it has finished working, but to keep it
in the charging state for beer performance in the next cleaning.
Indicator status description
Status description of main unit indicator
Status description of dust collection station indicator
10
EN
Flashing
Indicator Status
Charging/Powering on
Connecting to network/ No network
Recharge/ Dust collection
Power-on finished/Charging finished/Network
configeration success/Network connected
Standby-low power state/Dust collection
errors/Exceptionse
White light
White light Red light
Power off/Sleeping
X
X
X
X
X
X
Off
Off
Off
Off
OffOff
Off
Always-on
Always-on
Flashing
Breathing
Always-on
Indicator Status
Malfunctions
Power supply not connected
Charging
White Light
Powered on/Main unit fully charged
Flashing
Breathing
Off
Loading ...
Loading ...
Loading ...