Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/24220530-eve-rook/bga.png)
Turning on/off and cleaning modes
1. Power on/off
Press and hold the power buon for 3 seconds. The power buon indicator turns on, and the
main unit enters standby mode. When the main unit is stationary, press and hold the power
buon to turn it off, and the indicator will turn off.
When the main unit is in operation, pressing any buon will pause the main unit. Aer a pause,
press the power buon again to continue cleaning.
8. Fixed-point cleaning
Select fixed-point cleaning in the app, then set the target point on the map. The main unit will
automatically plan the route to the target point and clean in a 1.6×1.6 m square area with the
target point as the centre. The main unit will automatically return to the dust collection station to
recharge aer the cleaning is finished.
9. Scheduled cleaning
Use the app to set the time of scheduled cleaning, and the main unit will automatically start
cleaning at the specified time and automatically return to the dust collection station aer the
cleaning is finished.
If the Do-Not-Disturb Mode is enabled, the scheduled cleaning will not be executed during the
Do-Not-Disturb period.
10. Add water or clean the mop during operation
During the cleaning process, if you need to add water or clean the mop, pause the device by
pressing the power buon, remove the two-in-one water tank and mopping module, add water
or clean the mop, and then install the two-in-one water tank and mopping module. Finally, press
the power buon to continue working.
11. Sleep mode
If the main unit is not charging and there is no operation for more than 10 minutes, it will automatically
enter sleep mode. If it stays in sleep mode for more than 6 hours, it will automatically turn off.
To wake up the main unit, press any buon or use the app.
12. Resume cleaning
During the cleaning process, if the baery is low, the main unit will automatically return to the
dust collection station to recharge. Aer recharging, the main unit will automatically return to
where it le off and continue the cleaning process. If you manually stop cleaning, then move
or operate the main unit during the charging process, the resume cleaning will be cancelled.
13. Virtual wall/No-go area
In the app, you can set up virtual walls or no-go areas to prevent the main unit from entering
areas that do not need to be cleaned.
Before using the virtual wall/no-go area function, you need to save the map in the app. Moving
the main unit or major changes in the environment can cause the original map to become invalid
and result in the loss of virtual walls/no-go areas.
2. Return to recharge/Dust collection
In standby mode, press the recharge buon, and the main unit will return to the dust collection
station to recharge. When the main unit has finished cleaning, it will automatically return to the
dust collection station to recharge, and the indicator will flash white. If the baery is low during
cleaning, it will automatically return to the dust collection station to recharge. While the main
unit is charging, the dust collection station will automatically collect dust.
Within 2 minutes, the dust collection station will not collect dust multiple times. In the
Do-Not-Disturb Mode, the main unit will return to the dust collection station to recharge, but
the station will not collect dust.
3. Quick map building
When the main unit is powered on for the first time, there is no map in the app. Place the main
unit into the dust collection station, select quick map building in the app, and the main unit
will only build a map without cleaning. Aer the main unit automatically returns to the dust
collection station, the map will be completed and saved automatically.
4. Memory map
Aer the main unit successfully completes a quick map building or cleaning and returns to the
dust collection station to recharge, the app will automatically save and update the map. Aer
the map is successfully built, you can divide, merge areas or customise room names in the app.
5. Full house cleaning
Start full house cleaning through the app or by pressing the power buon. The main unit will
first carry out full house cleaning along a set path, then carry out edge cleaning, and automatically
return to the dust collection station to recharge aer the cleaning is finished.
6. Edge cleaning
Select Edge Cleaning in the app, and the main unit will automatically recognise the cleaning
area and perform edge cleaning, and automatically return to the dust collection station to
recharge aer the cleaning is finished.
7. Area cleaning
Users can select an area (quadrilateral) on the map, this area can be scaled and moved, and by
clicking on the node with a "+" sign to increase the number of variables into a polygon (up to 10
sides), you can also set the number of times the area is cleaned. Aer determining the cleaning
area, click the power buon to start cleaning the area, and automatically recharge aer each
cleaning task.
9
EN
Loading ...
Loading ...
Loading ...