Loading ...
Loading ...
Loading ...
17
CARE AND CLEANING
Container
To prepare your new machine for initial use, follow the steps under Normal
Cleaning below. This will clean the unit, and break-in the motor.
normal Cleaning:
1. Fill the container half full with warm water and add a couple drops of liquid
dish washing detergent to the container.
2. Snap or push the complete 2-part lid into locked position.
3. Select variable speed 1. Turn machine on and slowly increase speed to
variable speed 10, then to High.
4. Run the machine on High speed for 30 to 60 seconds.
5. Turn off the machine, and rinse and drain the container.
To Sanitize:
1. Follow Normal Cleaning instructions above.
2. Fill the container half full with water and 1 1/2 teaspoons of liquid bleach.
3. Snap or push the complete 2-part lid into locked position.
4. Select variable speed 1. Turn machine on and slowly increase speed to
variable speed 10, then to High.
5. Run the machine on High speed for 30 to 60 seconds.
6. Turn off the machine, and allow mixture to stand in the container for an
additional 1 1/2 minutes.
7. Pour bleach mixture out. Allow container to air dry.
8. Do not rinse after sanitizing.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash the parts in warm soapy water. Rinse clean
under running water, and dry. Reassemble before use.
iMPorTanT: To ensure continued and effective performance, do not put the
container, lid, lid plug or tamper in the dishwasher.
Loading ...
Loading ...
Loading ...